ECCouncil 312-38 (Certified Network Defender) Practice Test 73

Question 720

To correlate two sensors observing different steps of the same connection, which protective or investigative measure applies?

  1. Network tap placement
  2. Encrypted traffic metadata analysis
  3. Network sensor loss monitoring
  4. Full packet capture
  5. Packet capture time synchronization

Explanation

Correct Answer

E:

Consistent time sources reduce ambiguity when reconstructing distributed packet sequences; this mechanism directly supports the requirement to correlate two sensors observing different steps of the same connection.

Incorrect Answers

A:

A passive tap preserves packet visibility independently of switch mirroring behavior; that is useful when the task is to capture traffic across a critical server uplink without changing the forwarding path, not the stated requirement to correlate two sensors observing different steps of the same connection.

B:

IP, DNS, TLS and flow metadata still reveal communication patterns despite opaque payloads; a team would select it to investigate unusual HTTPS destinations without decrypting private content, which does not provide the particular result to correlate two sensors observing different steps of the same connection.

C:

Capture-drop and interface counters expose missing evidence before analysts trust incomplete traces; its operational purpose is to verify a sensor is keeping up during a sudden bandwidth spike, not to achieve the specific requirement to correlate two sensors observing different steps of the same connection.

D:

PCAP records rich content for protocol reconstruction but requires strong privacy and storage controls; applying it would serve retain exact application payload bytes for a narrowly scoped investigation without directly satisfying the goal to correlate two sensors observing different steps of the same connection.

Question 721

To investigate unusual HTTPS destinations without decrypting private content, what is the most direct option?

  1. Flow telemetry collection
  2. Encrypted traffic metadata analysis
  3. Virtual switch packet capture
  4. Asymmetric path capture

Explanation

Correct Answer

B:

IP, DNS, TLS and flow metadata still reveal communication patterns despite opaque payloads; it supplies the specific control needed to investigate unusual HTTPS destinations without decrypting private content.

Incorrect Answers

A:

NetFlow or IPFIX summarizes endpoints, ports, bytes and timing for broad network visibility; it could help someone trying to measure who exchanged traffic and how much without storing full payloads, but the problem is instead to investigate unusual HTTPS destinations without decrypting private content.

C:

Virtual port mirroring observes east-west frames absent from external physical links; a team would select it to inspect traffic between VMs on the same physical host, which does not provide the particular result to investigate unusual HTTPS destinations without decrypting private content.

D:

Routing may send reply traffic through another path, creating a one-sided observation point; its operational purpose is to find why only client-to-server packets appear at one router interface, not to achieve the specific requirement to investigate unusual HTTPS destinations without decrypting private content.

Question 722

To verify a sensor is keeping up during a sudden bandwidth spike, what should defenders select?

  1. Network sensor loss monitoring
  2. BPF capture filter
  3. Full packet capture
  4. Asymmetric path capture
  5. Encrypted traffic metadata analysis
  6. Wireshark display filter

Explanation

Correct Answer

A:

Capture-drop and interface counters expose missing evidence before analysts trust incomplete traces; that is why it addresses the operational task to verify a sensor is keeping up during a sudden bandwidth spike.

Incorrect Answers

B:

Capture-time filtering limits stored packets before deep analysis without modifying the source traffic; it could help someone trying to reduce acquisition volume to a suspect subnet and TCP service, but the problem is instead to verify a sensor is keeping up during a sudden bandwidth spike.

C:

PCAP records rich content for protocol reconstruction but requires strong privacy and storage controls; that is useful when the task is to retain exact application payload bytes for a narrowly scoped investigation, not the stated requirement to verify a sensor is keeping up during a sudden bandwidth spike.

D:

Routing may send reply traffic through another path, creating a one-sided observation point; a team would select it to find why only client-to-server packets appear at one router interface, which does not provide the particular result to verify a sensor is keeping up during a sudden bandwidth spike.

E:

IP, DNS, TLS and flow metadata still reveal communication patterns despite opaque payloads; its operational purpose is to investigate unusual HTTPS destinations without decrypting private content, not to achieve the specific requirement to verify a sensor is keeping up during a sudden bandwidth spike.

F:

Display expressions change analysis visibility, not the packets already collected in the file; applying it would serve inspect only relevant captured frames while keeping the original trace intact without directly satisfying the goal to verify a sensor is keeping up during a sudden bandwidth spike.

Question 723

To find why only client-to-server packets appear at one router interface and to inspect traffic between VMs on the same physical host, which TWO measures should the defender select? Choose TWO.

  1. Encrypted traffic metadata analysis
  2. Packet capture time synchronization
  3. Virtual switch packet capture
  4. Asymmetric path capture
  5. BPF capture filter

Explanation

Correct Answers

C:

Virtual port mirroring observes east-west frames absent from external physical links; this is the measure that can inspect traffic between VMs on the same physical host as one of the separately stated outcomes.

D:

Routing may send reply traffic through another path, creating a one-sided observation point; this is the measure that can find why only client-to-server packets appear at one router interface as one of the separately stated outcomes.

Incorrect Answers

A:

IP, DNS, TLS and flow metadata still reveal communication patterns despite opaque payloads; the outcome it supports is to investigate unusual HTTPS destinations without decrypting private content, whereas this scenario asks defenders to find why only client-to-server packets appear at one router interface and to inspect traffic between VMs on the same physical host.

B:

Consistent time sources reduce ambiguity when reconstructing distributed packet sequences; although relevant to correlate two sensors observing different steps of the same connection, it does not by itself achieve the required task to find why only client-to-server packets appear at one router interface and to inspect traffic between VMs on the same physical host.

E:

Capture-time filtering limits stored packets before deep analysis without modifying the source traffic; a team would select it to reduce acquisition volume to a suspect subnet and TCP service, which does not provide the particular result to find why only client-to-server packets appear at one router interface and to inspect traffic between VMs on the same physical host.

Question 724

To inspect traffic between VMs on the same physical host, which measure best meets the requirement?

  1. BPF capture filter
  2. Asymmetric path capture
  3. Virtual switch packet capture
  4. Packet capture time synchronization

Explanation

Correct Answer

C:

Virtual port mirroring observes east-west frames absent from external physical links; the requested outcome is precisely to inspect traffic between VMs on the same physical host.

Incorrect Answers

A:

Capture-time filtering limits stored packets before deep analysis without modifying the source traffic; its mechanism supports reduce acquisition volume to a suspect subnet and TCP service, while the requested control must be able to inspect traffic between VMs on the same physical host.

B:

Routing may send reply traffic through another path, creating a one-sided observation point; the outcome it supports is to find why only client-to-server packets appear at one router interface, whereas this scenario asks defenders to inspect traffic between VMs on the same physical host.

D:

Consistent time sources reduce ambiguity when reconstructing distributed packet sequences; it could help someone trying to correlate two sensors observing different steps of the same connection, but the problem is instead to inspect traffic between VMs on the same physical host.

Question 725

To reduce acquisition volume to a suspect subnet and TCP service, what control should be selected?

  1. BPF capture filter
  2. Encrypted traffic metadata analysis
  3. Wireshark display filter
  4. Asymmetric path capture
  5. Packet capture time synchronization

Explanation

Correct Answer

A:

Capture-time filtering limits stored packets before deep analysis without modifying the source traffic; this choice fits the scenario because the team must reduce acquisition volume to a suspect subnet and TCP service.

Incorrect Answers

B:

IP, DNS, TLS and flow metadata still reveal communication patterns despite opaque payloads; its mechanism supports investigate unusual HTTPS destinations without decrypting private content, while the requested control must be able to reduce acquisition volume to a suspect subnet and TCP service.

C:

Display expressions change analysis visibility, not the packets already collected in the file; the outcome it supports is to inspect only relevant captured frames while keeping the original trace intact, whereas this scenario asks defenders to reduce acquisition volume to a suspect subnet and TCP service.

D:

Routing may send reply traffic through another path, creating a one-sided observation point; although relevant to find why only client-to-server packets appear at one router interface, it does not by itself achieve the required task to reduce acquisition volume to a suspect subnet and TCP service.

E:

Consistent time sources reduce ambiguity when reconstructing distributed packet sequences; it could help someone trying to correlate two sensors observing different steps of the same connection, but the problem is instead to reduce acquisition volume to a suspect subnet and TCP service.

Question 726

To inspect only relevant captured frames while keeping the original trace intact, what control should be selected?

  1. Asymmetric path capture
  2. Wireshark display filter
  3. Network sensor loss monitoring
  4. BPF capture filter

Explanation

Correct Answer

B:

Display expressions change analysis visibility, not the packets already collected in the file; this mechanism directly supports the requirement to inspect only relevant captured frames while keeping the original trace intact.

Incorrect Answers

A:

Routing may send reply traffic through another path, creating a one-sided observation point; it addresses the different need to find why only client-to-server packets appear at one router interface, leaving the requested ability to inspect only relevant captured frames while keeping the original trace intact unresolved.

C:

Capture-drop and interface counters expose missing evidence before analysts trust incomplete traces; its mechanism supports verify a sensor is keeping up during a sudden bandwidth spike, while the requested control must be able to inspect only relevant captured frames while keeping the original trace intact.

D:

Capture-time filtering limits stored packets before deep analysis without modifying the source traffic; the outcome it supports is to reduce acquisition volume to a suspect subnet and TCP service, whereas this scenario asks defenders to inspect only relevant captured frames while keeping the original trace intact.

Question 727

To distinguish a new established TCP session from an unanswered connection request, which security control is most appropriate?

  1. TCP reset examination
  2. DNS query-response correlation
  3. SYN retransmission analysis
  4. TCP three-way handshake

Explanation

Correct Answer

D:

SYN, SYN-ACK and ACK exchange establishes connection state before ordinary application data; it supplies the specific control needed to distinguish a new established TCP session from an unanswered connection request.

Incorrect Answers

A:

RST frames indicate a participant or intervening device reset the session state; applying it would serve distinguish an actively rejected connection from silent packet dropping without directly satisfying the goal to distinguish a new established TCP session from an unanswered connection request.

B:

Transaction IDs, questions and source addresses help relate responses to resolver requests; it addresses the different need to find clients receiving unexpected answers for a sensitive hostname, leaving the requested ability to distinguish a new established TCP session from an unanswered connection request unresolved.

C:

Repeated initial SYNs without replies suggest path loss, filtering or unavailable service; the technique works for situations involving identify a client repeatedly trying to reach an unresponsive server port, rather than this need to distinguish a new established TCP session from an unanswered connection request.

Question 728

To identify a client repeatedly trying to reach an unresponsive server port, what would a network traffic analyst implement or use?

  1. TCP window analysis
  2. SYN retransmission analysis
  3. TCP reset examination
  4. TCP three-way handshake

Explanation

Correct Answer

B:

Repeated initial SYNs without replies suggest path loss, filtering or unavailable service; that is why it addresses the operational task to identify a client repeatedly trying to reach an unresponsive server port.

Incorrect Answers

A:

Advertised receive windows govern how much unacknowledged data a sender may transmit; its operational purpose is to spot receive-buffer pressure that is limiting application throughput, not to achieve the specific requirement to identify a client repeatedly trying to reach an unresponsive server port.

C:

RST frames indicate a participant or intervening device reset the session state; it addresses the different need to distinguish an actively rejected connection from silent packet dropping, leaving the requested ability to identify a client repeatedly trying to reach an unresponsive server port unresolved.

D:

SYN, SYN-ACK and ACK exchange establishes connection state before ordinary application data; the technique works for situations involving distinguish a new established TCP session from an unanswered connection request, rather than this need to identify a client repeatedly trying to reach an unresponsive server port.

Question 729

To distinguish an actively rejected connection from silent packet dropping, which practice addresses that objective?

  1. TCP retransmission rate
  2. TCP reset examination
  3. TCP window analysis
  4. TCP three-way handshake

Explanation

Correct Answer

B:

RST frames indicate a participant or intervening device reset the session state; its relevant protective or investigative effect is to distinguish an actively rejected connection from silent packet dropping.

Incorrect Answers

A:

Retransmissions indicate missing acknowledgments or loss and need context from round-trip timing; a team would select it to investigate congestion or packet loss affecting a file transfer, which does not provide the particular result to distinguish an actively rejected connection from silent packet dropping.

C:

Advertised receive windows govern how much unacknowledged data a sender may transmit; applying it would serve spot receive-buffer pressure that is limiting application throughput without directly satisfying the goal to distinguish an actively rejected connection from silent packet dropping.

D:

SYN, SYN-ACK and ACK exchange establishes connection state before ordinary application data; it addresses the different need to distinguish a new established TCP session from an unanswered connection request, leaving the requested ability to distinguish an actively rejected connection from silent packet dropping unresolved.

Question 730

To spot receive-buffer pressure that is limiting application throughput, which tool, policy, or technique is appropriate?

  1. SYN retransmission analysis
  2. DNS query-response correlation
  3. TCP window analysis
  4. TCP three-way handshake
  5. ARP traffic inspection

Explanation

Correct Answer

C:

Advertised receive windows govern how much unacknowledged data a sender may transmit; the requested outcome is precisely to spot receive-buffer pressure that is limiting application throughput.

Incorrect Answers

A:

Repeated initial SYNs without replies suggest path loss, filtering or unavailable service; that is useful when the task is to identify a client repeatedly trying to reach an unresponsive server port, not the stated requirement to spot receive-buffer pressure that is limiting application throughput.

B:

Transaction IDs, questions and source addresses help relate responses to resolver requests; a team would select it to find clients receiving unexpected answers for a sensitive hostname, which does not provide the particular result to spot receive-buffer pressure that is limiting application throughput.

D:

SYN, SYN-ACK and ACK exchange establishes connection state before ordinary application data; applying it would serve distinguish a new established TCP session from an unanswered connection request without directly satisfying the goal to spot receive-buffer pressure that is limiting application throughput.

E:

Conflicting address announcements reveal potential local impersonation or legitimate failover needing confirmation; it addresses the different need to detect two MAC addresses repeatedly claiming the same default gateway IP, leaving the requested ability to spot receive-buffer pressure that is limiting application throughput unresolved.

Certified Network Defender (312-38) Practice Tests