Question 700
To enable secure client handoff between access points without repeated full authentication, what technique should the team use?
- Remote AP tunnel security
- Wireless controller configuration backup
- Management SSID removal
- Wireless roaming key management
- Central WLAN controller RBAC
Explanation
Correct Answer
D:Fast transition methods support mobility while requiring secure key hierarchy and compatible clients; the requested outcome is precisely to enable secure client handoff between access points without repeated full authentication.
Incorrect Answers
A:Authenticated encrypted control and data tunnels prevent alteration across untrusted WAN paths; that is useful when the task is to protect traffic between branch access points and central controllers, not the stated requirement to enable secure client handoff between access points without repeated full authentication.
B:Protected backups and restoration testing preserve network access without recreating insecure defaults; a team would select it to recover approved SSIDs and radio policy after controller replacement, which does not provide the particular result to enable secure client handoff between access points without repeated full authentication.
C:Management isolation keeps control interfaces on dedicated, strongly authenticated paths; its operational purpose is to avoid exposing AP administrative access through the same visitor network, not to achieve the specific requirement to enable secure client handoff between access points without repeated full authentication.
E:Controller roles separate operational monitoring from high-risk configuration changes; it addresses the different need to restrict which technicians can alter enterprise wireless authentication settings, leaving the requested ability to enable secure client handoff between access points without repeated full authentication unresolved.
Question 701
To troubleshoot older endpoints failing authentication after fast roaming is enabled, which protective or investigative measure applies?
- 802.11r compatibility review
- Central WLAN controller RBAC
- Wireless roaming key management
- Remote AP tunnel security
Explanation
Correct Answer
A:Client support and secure transition settings affect successful mobility on enterprise WLANs; this choice fits the scenario because the team must troubleshoot older endpoints failing authentication after fast roaming is enabled.
Incorrect Answers
B:Controller roles separate operational monitoring from high-risk configuration changes; that is useful when the task is to restrict which technicians can alter enterprise wireless authentication settings, not the stated requirement to troubleshoot older endpoints failing authentication after fast roaming is enabled.
C:Fast transition methods support mobility while requiring secure key hierarchy and compatible clients; a team would select it to enable secure client handoff between access points without repeated full authentication, which does not provide the particular result to troubleshoot older endpoints failing authentication after fast roaming is enabled.
D:Authenticated encrypted control and data tunnels prevent alteration across untrusted WAN paths; its operational purpose is to protect traffic between branch access points and central controllers, not to achieve the specific requirement to troubleshoot older endpoints failing authentication after fast roaming is enabled.
Question 702
To trace which user and device authenticated to a specific AP at a given time, what is the most direct option?
- 802.11r compatibility review
- Wireless client density metrics
- AP inventory reconciliation
- RADIUS accounting logs
Explanation
Correct Answer
D:AAA accounting maps identities, session timing and access equipment for investigations; this mechanism directly supports the requirement to trace which user and device authenticated to a specific AP at a given time.
Incorrect Answers
A:Client support and secure transition settings affect successful mobility on enterprise WLANs; although relevant to troubleshoot older endpoints failing authentication after fast roaming is enabled, it does not by itself achieve the required task to trace which user and device authenticated to a specific AP at a given time.
B:Association counts, airtime and retry rates reveal load-related behavior requiring RF analysis; it could help someone trying to distinguish capacity saturation from targeted radio interference, but the problem is instead to trace which user and device authenticated to a specific AP at a given time.
C:Comparing live radios with configuration inventory reveals equipment outside normal change control; that is useful when the task is to find an orphaned access point still announcing an old employee SSID, not the stated requirement to trace which user and device authenticated to a specific AP at a given time.
Question 703
To find an orphaned access point still announcing an old employee SSID, what should defenders select?
- AP inventory reconciliation
- Remote AP tunnel security
- 802.11r compatibility review
- RADIUS accounting logs
- Wireless client density metrics
- Wireless roaming key management
Explanation
Correct Answer
A:Comparing live radios with configuration inventory reveals equipment outside normal change control; it supplies the specific control needed to find an orphaned access point still announcing an old employee SSID.
Incorrect Answers
B:Authenticated encrypted control and data tunnels prevent alteration across untrusted WAN paths; although relevant to protect traffic between branch access points and central controllers, it does not by itself achieve the required task to find an orphaned access point still announcing an old employee SSID.
C:Client support and secure transition settings affect successful mobility on enterprise WLANs; it could help someone trying to troubleshoot older endpoints failing authentication after fast roaming is enabled, but the problem is instead to find an orphaned access point still announcing an old employee SSID.
D:AAA accounting maps identities, session timing and access equipment for investigations; that is useful when the task is to trace which user and device authenticated to a specific AP at a given time, not the stated requirement to find an orphaned access point still announcing an old employee SSID.
E:Association counts, airtime and retry rates reveal load-related behavior requiring RF analysis; a team would select it to distinguish capacity saturation from targeted radio interference, which does not provide the particular result to find an orphaned access point still announcing an old employee SSID.
F:Fast transition methods support mobility while requiring secure key hierarchy and compatible clients; its operational purpose is to enable secure client handoff between access points without repeated full authentication, not to achieve the specific requirement to find an orphaned access point still announcing an old employee SSID.
Question 704
To trace which user and device authenticated to a specific AP at a given time, to find an orphaned access point still announcing an old employee SSID, and to distinguish capacity saturation from targeted radio interference, which THREE measures should the team select? Choose THREE.
- Wireless controller configuration backup
- Wireless client density metrics
- AP inventory reconciliation
- 802.11r compatibility review
- Wireless roaming key management
- RADIUS accounting logs
Explanation
Correct Answers
B:Association counts, airtime and retry rates reveal load-related behavior requiring RF analysis; it satisfies the distinct requirement to distinguish capacity saturation from targeted radio interference within the multi-control task.
C:Comparing live radios with configuration inventory reveals equipment outside normal change control; it satisfies the distinct requirement to find an orphaned access point still announcing an old employee SSID within the multi-control task.
F:AAA accounting maps identities, session timing and access equipment for investigations; it satisfies the distinct requirement to trace which user and device authenticated to a specific AP at a given time within the multi-control task.
Incorrect Answers
A:Controller configuration backups preserve access-point settings and enable restoration after failure. They do not associate WLAN clients with specific authentication records, identify an obsolete broadcasting AP, or measure radio contention.
D:Client support and secure transition settings affect successful mobility on enterprise WLANs; it could help someone trying to troubleshoot older endpoints failing authentication after fast roaming is enabled, but the problem is instead to trace which user and device authenticated to a specific AP at a given time, to find an orphaned access point still announcing an old employee SSID, and to distinguish capacity saturation from targeted radio interference.
E:Fast transition methods support mobility while requiring secure key hierarchy and compatible clients; that is useful when the task is to enable secure client handoff between access points without repeated full authentication, not the stated requirement to trace which user and device authenticated to a specific AP at a given time, to find an orphaned access point still announcing an old employee SSID, and to distinguish capacity saturation from targeted radio interference.
Question 705
To protect recurring proximity connections against unauthorized pairing, which mechanism best fits?
- NFC relay risk assessment
- Bluetooth secure bonding
- BLE privacy addresses
- Zigbee joining restrictions
- Wireless mesh backhaul encryption
Explanation
Correct Answer
B:Authenticated pairing stores negotiated trust material for future sessions under supported modes; its relevant protective or investigative effect is to protect recurring proximity connections against unauthorized pairing.
Incorrect Answers
A:Physical proximity assumptions can fail under relay conditions even when the application uses cryptography; the technique works for situations involving consider attacks that extend a near-field authentication exchange beyond its intended range, rather than this need to protect recurring proximity connections against unauthorized pairing.
C:Resolvable private addresses rotate over time while known peers can recognize authorized devices; the outcome it supports is to reduce tracking of low-energy devices through static radio addresses, whereas this scenario asks defenders to protect recurring proximity connections against unauthorized pairing.
D:Join windows, install codes and key handling control entry into low-power wireless networks; although relevant to stop unauthorized sensors joining a building automation mesh, it does not by itself achieve the required task to protect recurring proximity connections against unauthorized pairing.
E:Secure mesh links require authenticated encryption as well as access control for client SSIDs; it could help someone trying to protect AP-to-AP traffic over an outdoor radio link, but the problem is instead to protect recurring proximity connections against unauthorized pairing.
Question 706
To reduce tracking of low-energy devices through static radio addresses, which measure best meets the requirement?
- NFC relay risk assessment
- BLE privacy addresses
- Wireless mesh backhaul encryption
- Bluetooth secure bonding
Explanation
Correct Answer
B:Resolvable private addresses rotate over time while known peers can recognize authorized devices; the requested outcome is precisely to reduce tracking of low-energy devices through static radio addresses.
Incorrect Answers
A:Physical proximity assumptions can fail under relay conditions even when the application uses cryptography; it addresses the different need to consider attacks that extend a near-field authentication exchange beyond its intended range, leaving the requested ability to reduce tracking of low-energy devices through static radio addresses unresolved.
C:Secure mesh links require authenticated encryption as well as access control for client SSIDs; its mechanism supports protect AP-to-AP traffic over an outdoor radio link, while the requested control must be able to reduce tracking of low-energy devices through static radio addresses.
D:Authenticated pairing stores negotiated trust material for future sessions under supported modes; the outcome it supports is to protect recurring proximity connections against unauthorized pairing, whereas this scenario asks defenders to reduce tracking of low-energy devices through static radio addresses.
Question 707
To consider attacks that extend a near-field authentication exchange beyond its intended range, what control should be selected?
- NFC relay risk assessment
- Wireless mesh backhaul encryption
- BLE privacy addresses
- Wireless bridge MAC policy
Explanation
Correct Answer
A:Physical proximity assumptions can fail under relay conditions even when the application uses cryptography; this choice fits the scenario because the team must consider attacks that extend a near-field authentication exchange beyond its intended range.
Incorrect Answers
B:Secure mesh links require authenticated encryption as well as access control for client SSIDs; it addresses the different need to protect AP-to-AP traffic over an outdoor radio link, leaving the requested ability to consider attacks that extend a near-field authentication exchange beyond its intended range unresolved.
C:Resolvable private addresses rotate over time while known peers can recognize authorized devices; the technique works for situations involving reduce tracking of low-energy devices through static radio addresses, rather than this need to consider attacks that extend a near-field authentication exchange beyond its intended range.
D:Bridge authorization and physical inventory limit covert Layer-2 reachability; its mechanism supports prevent unauthorized devices extending an office LAN through a radio bridge, while the requested control must be able to consider attacks that extend a near-field authentication exchange beyond its intended range.
Question 708
To stop unauthorized sensors joining a building automation mesh, which security control is most appropriate?
- Hotspot certificate validation
- SSID retirement plan
- Zigbee joining restrictions
- NFC relay risk assessment
Explanation
Correct Answer
C:Join windows, install codes and key handling control entry into low-power wireless networks; this mechanism directly supports the requirement to stop unauthorized sensors joining a building automation mesh.
Incorrect Answers
A:Server identity checks prevent counterfeit tunnel endpoints regardless of hotspot ownership; its operational purpose is to protect a roaming user's VPN connection from active wireless interception, not to achieve the specific requirement to stop unauthorized sensors joining a building automation mesh.
B:Removing old WLAN profiles and AP broadcasts narrows fallback access paths; applying it would serve stop clients joining a deprecated weakly secured office network without directly satisfying the goal to stop unauthorized sensors joining a building automation mesh.
D:Physical proximity assumptions can fail under relay conditions even when the application uses cryptography; the technique works for situations involving consider attacks that extend a near-field authentication exchange beyond its intended range, rather than this need to stop unauthorized sensors joining a building automation mesh.
Question 709
To protect AP-to-AP traffic over an outdoor radio link, what would a wireless security engineer implement or use?
- Wireless mesh backhaul encryption
- NFC relay risk assessment
- Zigbee joining restrictions
- Bluetooth secure bonding
Explanation
Correct Answer
A:Secure mesh links require authenticated encryption as well as access control for client SSIDs; it supplies the specific control needed to protect AP-to-AP traffic over an outdoor radio link.
Incorrect Answers
B:Physical proximity assumptions can fail under relay conditions even when the application uses cryptography; its operational purpose is to consider attacks that extend a near-field authentication exchange beyond its intended range, not to achieve the specific requirement to protect AP-to-AP traffic over an outdoor radio link.
C:Join windows, install codes and key handling control entry into low-power wireless networks; applying it would serve stop unauthorized sensors joining a building automation mesh without directly satisfying the goal to protect AP-to-AP traffic over an outdoor radio link.
D:Authenticated pairing stores negotiated trust material for future sessions under supported modes; it addresses the different need to protect recurring proximity connections against unauthorized pairing, leaving the requested ability to protect AP-to-AP traffic over an outdoor radio link unresolved.
Question 710
To revoke a stolen industrial cellular modem's network identity, which practice addresses that objective?
- Guest DNS isolation
- Wireless mesh backhaul encryption
- Bluetooth secure bonding
- LTE private-network SIM management
- Hotspot certificate validation
Explanation
Correct Answer
D:Subscriber credential lifecycle governs access to cellular infrastructure independently of IP filtering; that is why it addresses the operational task to revoke a stolen industrial cellular modem's network identity.
Incorrect Answers
A:Separate resolver views and firewall rules limit unintended disclosure and reachability; that is useful when the task is to prevent guest WLAN clients resolving internal-only application records, not the stated requirement to revoke a stolen industrial cellular modem's network identity.
B:Secure mesh links require authenticated encryption as well as access control for client SSIDs; a team would select it to protect AP-to-AP traffic over an outdoor radio link, which does not provide the particular result to revoke a stolen industrial cellular modem's network identity.
C:Authenticated pairing stores negotiated trust material for future sessions under supported modes; its operational purpose is to protect recurring proximity connections against unauthorized pairing, not to achieve the specific requirement to revoke a stolen industrial cellular modem's network identity.
E:Server identity checks prevent counterfeit tunnel endpoints regardless of hotspot ownership; it addresses the different need to protect a roaming user's VPN connection from active wireless interception, leaving the requested ability to revoke a stolen industrial cellular modem's network identity unresolved.