Question 680
To identify coverage holes and unexpected neighboring access points before go-live and to distinguish non-Wi-Fi interference from malicious packet behavior, which TWO measures should the defender select? Choose TWO.
- Directional antenna design
- RF jamming response
- Transmit power tuning
- Wireless site survey
- Spectrum analysis
Explanation
Correct Answers
D:Measured RSSI, noise and RF maps guide secure and reliable AP placement; it satisfies the distinct requirement to identify coverage holes and unexpected neighboring access points before go-live within the multi-control task.
E:RF analysis reveals energy sources that normal 802.11 frame capture may not classify; it satisfies the distinct requirement to distinguish non-Wi-Fi interference from malicious packet behavior within the multi-control task.
Incorrect Answers
A:Antenna patterns improve link budget and limit casual propagation, not guaranteed confidentiality; that is useful when the task is to concentrate a point-to-point wireless link away from unnecessary directions, not the stated requirement to identify coverage holes and unexpected neighboring access points before go-live and to distinguish non-Wi-Fi interference from malicious packet behavior.
B:Physical-layer interference requires spectrum and location analysis rather than only password changes; a team would select it to investigate widespread WLAN disruption with elevated noise and missing frames, which does not provide the particular result to identify coverage holes and unexpected neighboring access points before go-live and to distinguish non-Wi-Fi interference from malicious packet behavior.
C:Power adjustment changes signal footprint but cannot replace cryptographic authentication; its operational purpose is to reduce RF leakage into adjacent public areas while maintaining coverage, not to achieve the specific requirement to identify coverage holes and unexpected neighboring access points before go-live and to distinguish non-Wi-Fi interference from malicious packet behavior.
Question 681
To distinguish non-Wi-Fi interference from malicious packet behavior, what should defenders select?
- Directional antenna design
- RF jamming response
- Wireless site survey
- Spectrum analysis
Explanation
Correct Answer
D:RF analysis reveals energy sources that normal 802.11 frame capture may not classify; its relevant protective or investigative effect is to distinguish non-Wi-Fi interference from malicious packet behavior.
Incorrect Answers
A:Antenna patterns improve link budget and limit casual propagation, not guaranteed confidentiality; it could help someone trying to concentrate a point-to-point wireless link away from unnecessary directions, but the problem is instead to distinguish non-Wi-Fi interference from malicious packet behavior.
B:Physical-layer interference requires spectrum and location analysis rather than only password changes; that is useful when the task is to investigate widespread WLAN disruption with elevated noise and missing frames, not the stated requirement to distinguish non-Wi-Fi interference from malicious packet behavior.
C:Measured RSSI, noise and RF maps guide secure and reliable AP placement; a team would select it to identify coverage holes and unexpected neighboring access points before go-live, which does not provide the particular result to distinguish non-Wi-Fi interference from malicious packet behavior.
Question 682
To investigate widespread WLAN disruption with elevated noise and missing frames, what should defenders select?
- Spectrum analysis
- Transmit power tuning
- RF jamming response
- Wireless site survey
Explanation
Correct Answer
C:Physical-layer interference requires spectrum and location analysis rather than only password changes; the requested outcome is precisely to investigate widespread WLAN disruption with elevated noise and missing frames.
Incorrect Answers
A:RF analysis reveals energy sources that normal 802.11 frame capture may not classify; although relevant to distinguish non-Wi-Fi interference from malicious packet behavior, it does not by itself achieve the required task to investigate widespread WLAN disruption with elevated noise and missing frames.
B:Power adjustment changes signal footprint but cannot replace cryptographic authentication; it could help someone trying to reduce RF leakage into adjacent public areas while maintaining coverage, but the problem is instead to investigate widespread WLAN disruption with elevated noise and missing frames.
D:Measured RSSI, noise and RF maps guide secure and reliable AP placement; a team would select it to identify coverage holes and unexpected neighboring access points before go-live, which does not provide the particular result to investigate widespread WLAN disruption with elevated noise and missing frames.
Question 683
To protect staff from connecting to a lookalike corporate SSID, which mechanism best fits?
- Evil-twin AP mitigation
- Deauthentication flood detection
- KRACK patch validation
- WPS disablement
Explanation
Correct Answer
A:Trusted EAP profiles and certificate validation distinguish authorized infrastructure from impersonators; this choice fits the scenario because the team must protect staff from connecting to a lookalike corporate SSID.
Incorrect Answers
B:Wireless captures and PMF status reveal spoofed disconnect patterns beyond ordinary client roaming; although relevant to identify repeated management-frame disconnects aimed at many stations, it does not by itself achieve the required task to protect staff from connecting to a lookalike corporate SSID.
C:Supplicant and AP fixes address handshake state handling rather than requiring a new Wi-Fi password alone; it could help someone trying to ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes, but the problem is instead to protect staff from connecting to a lookalike corporate SSID.
D:Disabling unnecessary WPS paths prevents bypass of a strong ordinary WPA2 passphrase; that is useful when the task is to remove PIN-based enrollment weaknesses from a small office router, not the stated requirement to protect staff from connecting to a lookalike corporate SSID.
Question 684
To identify repeated management-frame disconnects aimed at many stations, which measure best meets the requirement?
- KRACK patch validation
- WPS disablement
- MAC-filtering limitations
- Evil-twin AP mitigation
- Deauthentication flood detection
- Hidden SSID limitations
Explanation
Correct Answer
E:Wireless captures and PMF status reveal spoofed disconnect patterns beyond ordinary client roaming; this mechanism directly supports the requirement to identify repeated management-frame disconnects aimed at many stations.
Incorrect Answers
A:Supplicant and AP fixes address handshake state handling rather than requiring a new Wi-Fi password alone; its mechanism supports ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes, while the requested control must be able to identify repeated management-frame disconnects aimed at many stations.
B:Disabling unnecessary WPS paths prevents bypass of a strong ordinary WPA2 passphrase; the outcome it supports is to remove PIN-based enrollment weaknesses from a small office router, whereas this scenario asks defenders to identify repeated management-frame disconnects aimed at many stations.
C:Wireless source MACs can be observed and spoofed, so cryptographic access control remains necessary; although relevant to avoid assuming an AP allowlist provides strong device authentication, it does not by itself achieve the required task to identify repeated management-frame disconnects aimed at many stations.
D:Trusted EAP profiles and certificate validation distinguish authorized infrastructure from impersonators; it could help someone trying to protect staff from connecting to a lookalike corporate SSID, but the problem is instead to identify repeated management-frame disconnects aimed at many stations.
F:Clients can still reveal configured network names; hiding beacons does not protect frame contents; a team would select it to avoid treating suppressed beacon names as a meaningful encryption layer, which does not provide the particular result to identify repeated management-frame disconnects aimed at many stations.
Question 685
To ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes, what control should be selected?
- Deauthentication flood detection
- Hidden SSID limitations
- KRACK patch validation
- Evil-twin AP mitigation
- MAC-filtering limitations
Explanation
Correct Answer
C:Supplicant and AP fixes address handshake state handling rather than requiring a new Wi-Fi password alone; it supplies the specific control needed to ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes.
Incorrect Answers
A:Wireless captures and PMF status reveal spoofed disconnect patterns beyond ordinary client roaming; the technique works for situations involving identify repeated management-frame disconnects aimed at many stations, rather than this need to ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes.
B:Clients can still reveal configured network names; hiding beacons does not protect frame contents; its mechanism supports avoid treating suppressed beacon names as a meaningful encryption layer, while the requested control must be able to ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes.
D:Trusted EAP profiles and certificate validation distinguish authorized infrastructure from impersonators; although relevant to protect staff from connecting to a lookalike corporate SSID, it does not by itself achieve the required task to ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes.
E:Wireless source MACs can be observed and spoofed, so cryptographic access control remains necessary; it could help someone trying to avoid assuming an AP allowlist provides strong device authentication, but the problem is instead to ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes.
Question 686
To remove PIN-based enrollment weaknesses from a small office router, which security control is most appropriate?
- Hidden SSID limitations
- MAC-filtering limitations
- Deauthentication flood detection
- WPS disablement
Explanation
Correct Answer
D:Disabling unnecessary WPS paths prevents bypass of a strong ordinary WPA2 passphrase; that is why it addresses the operational task to remove PIN-based enrollment weaknesses from a small office router.
Incorrect Answers
A:Clients can still reveal configured network names; hiding beacons does not protect frame contents; it addresses the different need to avoid treating suppressed beacon names as a meaningful encryption layer, leaving the requested ability to remove PIN-based enrollment weaknesses from a small office router unresolved.
B:Wireless source MACs can be observed and spoofed, so cryptographic access control remains necessary; the technique works for situations involving avoid assuming an AP allowlist provides strong device authentication, rather than this need to remove PIN-based enrollment weaknesses from a small office router.
C:Wireless captures and PMF status reveal spoofed disconnect patterns beyond ordinary client roaming; its mechanism supports identify repeated management-frame disconnects aimed at many stations, while the requested control must be able to remove PIN-based enrollment weaknesses from a small office router.
Question 687
To avoid assuming an AP allowlist provides strong device authentication, what would a wireless security engineer implement or use?
- Open Wi-Fi risk
- Wi-Fi handshake capture monitoring
- WPS disablement
- MAC-filtering limitations
Explanation
Correct Answer
D:Wireless source MACs can be observed and spoofed, so cryptographic access control remains necessary; its relevant protective or investigative effect is to avoid assuming an AP allowlist provides strong device authentication.
Incorrect Answers
A:End-to-end TLS and trusted tunnels secure applications when the wireless link lacks encryption; applying it would serve keep corporate credentials from traversing an unauthenticated public hotspot unprotected without directly satisfying the goal to avoid assuming an AP allowlist provides strong device authentication.
B:Frame analysis can reveal forced reconnect patterns but cannot infer an actual password compromise alone; it addresses the different need to investigate unusual repeated authentication exchanges near an AP, leaving the requested ability to avoid assuming an AP allowlist provides strong device authentication unresolved.
C:Disabling unnecessary WPS paths prevents bypass of a strong ordinary WPA2 passphrase; the technique works for situations involving remove PIN-based enrollment weaknesses from a small office router, rather than this need to avoid assuming an AP allowlist provides strong device authentication.
Question 688
To avoid treating suppressed beacon names as a meaningful encryption layer, which practice addresses that objective?
- Hidden SSID limitations
- Open Wi-Fi risk
- WPS disablement
- Wi-Fi handshake capture monitoring
Explanation
Correct Answer
A:Clients can still reveal configured network names; hiding beacons does not protect frame contents; the requested outcome is precisely to avoid treating suppressed beacon names as a meaningful encryption layer.
Incorrect Answers
B:End-to-end TLS and trusted tunnels secure applications when the wireless link lacks encryption; applying it would serve keep corporate credentials from traversing an unauthenticated public hotspot unprotected without directly satisfying the goal to avoid treating suppressed beacon names as a meaningful encryption layer.
C:Disabling unnecessary WPS paths prevents bypass of a strong ordinary WPA2 passphrase; it addresses the different need to remove PIN-based enrollment weaknesses from a small office router, leaving the requested ability to avoid treating suppressed beacon names as a meaningful encryption layer unresolved.
D:Frame analysis can reveal forced reconnect patterns but cannot infer an actual password compromise alone; the technique works for situations involving investigate unusual repeated authentication exchanges near an AP, rather than this need to avoid treating suppressed beacon names as a meaningful encryption layer.
Question 689
To keep corporate credentials from traversing an unauthenticated public hotspot unprotected, which tool, policy, or technique is appropriate?
- MAC-filtering limitations
- Open Wi-Fi risk
- KRACK patch validation
- Captive portal impersonation
Explanation
Correct Answer
B:End-to-end TLS and trusted tunnels secure applications when the wireless link lacks encryption; this choice fits the scenario because the team must keep corporate credentials from traversing an unauthenticated public hotspot unprotected.
Incorrect Answers
A:Wireless source MACs can be observed and spoofed, so cryptographic access control remains necessary; a team would select it to avoid assuming an AP allowlist provides strong device authentication, which does not provide the particular result to keep corporate credentials from traversing an unauthenticated public hotspot unprotected.
C:Supplicant and AP fixes address handshake state handling rather than requiring a new Wi-Fi password alone; applying it would serve ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes without directly satisfying the goal to keep corporate credentials from traversing an unauthenticated public hotspot unprotected.
D:Portal identity checks and avoidance of enterprise credentials on guest portals reduce phishing risk; it addresses the different need to identify fake hotspot login pages requesting enterprise passwords, leaving the requested ability to keep corporate credentials from traversing an unauthenticated public hotspot unprotected unresolved.
Question 690
To identify fake hotspot login pages requesting enterprise passwords, what safeguard would be most applicable?
- Rogue DHCP on WLAN
- Captive portal impersonation
- KRACK patch validation
- Wireless peer isolation
- Hidden SSID limitations
Explanation
Correct Answer
B:Portal identity checks and avoidance of enterprise credentials on guest portals reduce phishing risk; this mechanism directly supports the requirement to identify fake hotspot login pages requesting enterprise passwords.
Incorrect Answers
A:Access-layer DHCP trust and client separation restrict unauthorized addressing responses; that is useful when the task is to stop a newly connected radio client supplying hostile DNS and gateway leases, not the stated requirement to identify fake hotspot login pages requesting enterprise passwords.
C:Supplicant and AP fixes address handshake state handling rather than requiring a new Wi-Fi password alone; its operational purpose is to ensure clients do not reinstall old session keys during vulnerable WPA2 handshakes, not to achieve the specific requirement to identify fake hotspot login pages requesting enterprise passwords.
D:AP client isolation restricts local station-to-station traffic while routing rules govern upstream networks; applying it would serve stop guest clients from directly reaching other guests on the same access point without directly satisfying the goal to identify fake hotspot login pages requesting enterprise passwords.
E:Clients can still reveal configured network names; hiding beacons does not protect frame contents; it addresses the different need to avoid treating suppressed beacon names as a meaningful encryption layer, leaving the requested ability to identify fake hotspot login pages requesting enterprise passwords unresolved.