Google Associate Cloud Engineer Practice Test 33

Question 320

A private site-to-cloud connection needs resilient physical paths rather than only redundant routing sessions on one link. Which choice provides the required behavior?

  1. Plan independent redundant Interconnect or partner connections per the required topology
  2. Treat service tier selection as an external network routing and pricing concern
  3. Evaluate HA VPN over Cloud Interconnect
  4. Deploy HA VPN with the required interface and peer topology
  5. Pair the attachment with Cloud Router BGP configuration

Explanation

Correct Answer

A:

Physical connection redundancy addresses circuit and location failures. Duplicate BGP sessions over a single failed physical connection cannot restore transport.

Incorrect Answers

B:

The choice is aimed at a different purpose: to avoid using network tiers as a private routing control; Even if it can distinguish external service tier from internal routing, that would not accomplish the stated requirement to protect hybrid links against physical failures.

C:

Its purpose is to encrypt traffic over Interconnect. That distinction matters: the scenario calls for an action to protect hybrid links against physical failures, not this separate configuration task.

D:

This approach can use a redundant HA VPN topology. The requirement is to protect hybrid links against physical failures, so it controls a different part of the workflow and leaves that result unaddressed.

E:

This setting would exchange dynamic hybrid routes for Interconnect. That behavior does not establish the requested ability to protect hybrid links against physical failures; it addresses an adjacent concern instead.

Question 321

A VM has a route to the target but TCP connections are denied because the network has no matching ingress allow. How should the team proceed?

  1. Create separate custom VPC networks for the teams
  2. Add a narrowly scoped ingress allow firewall rule for the destination
  3. Use appropriate target selectors and destination or source ranges in a firewall rule
  4. Evaluate the applicable firewall rule and policy priority order
  5. Review the implied egress allow behavior and explicit deny policies

Explanation

Correct Answer

B:

The implied ingress behavior denies traffic that is not otherwise permitted. Routing reachability alone cannot authorize an inbound connection.

Incorrect Answers

A:

This mechanism is intended to isolate team networking into separate VPCs. It does not implement the required action to fix missing firewall ingress permission, even though both are relevant to the same general service.

C:

Select this when the goal is to scope firewall denial to particular workloads. Here the decisive requirement is to fix missing firewall ingress permission, and that outcome is not achieved by this action.

D:

The tool can evaluate rule precedence based on priority, but it cannot be substituted for the capability needed to fix missing firewall ingress permission. Its operational effect is not equivalent.

E:

The result of this choice would be to understand default outbound firewall behavior. The requested outcome, to fix missing firewall ingress permission, is handled at a different layer or through another operation.

Question 322

A VPC unexpectedly allows outbound connections even though no custom egress allow rule exists. What is the most direct solution?

  1. Use appropriate target selectors and destination or source ranges in a firewall rule
  2. Evaluate the applicable firewall rule and policy priority order
  3. Add a narrowly scoped ingress allow firewall rule for the destination
  4. Review the implied egress allow behavior and explicit deny policies

Explanation

Correct Answer

D:

Google Cloud VPC networks have implied firewall behavior for egress and ingress. Higher-priority rules and policies can change the effective result.

Incorrect Answers

A:

Using this action would scope firewall denial to particular workloads, not explain allowed egress without a custom rule. Its function is different from the specific change described in the scenario.

B:

This setting would evaluate rule precedence based on priority. That behavior does not establish the requested ability to explain allowed egress without a custom rule; it addresses an adjacent concern instead.

C:

This choice is useful to authorize inbound packets with a matching rule. The stated task is to explain allowed egress without a custom rule, which requires a different mechanism or permission scope.

Question 323

Two overlapping rules match the same traffic and have different priority numbers. Which implementation matches this requirement?

  1. Use service-account-based firewall targets where supported
  2. Use appropriate target selectors and destination or source ranges in a firewall rule
  3. Add a narrowly scoped ingress allow firewall rule for the destination
  4. Evaluate the applicable firewall rule and policy priority order
  5. Review the implied egress allow behavior and explicit deny policies

Explanation

Correct Answer

D:

Rule priorities determine which matching rule takes precedence within the relevant evaluation model. Reading only action values without priority can produce the wrong conclusion.

Incorrect Answers

A:

The choice is aimed at a different purpose: to filter network traffic for selected service account VMs; Even if it can target firewall rules by VM service identity, that would not accomplish the stated requirement to identify the effective matching firewall rule.

B:

This mechanism is intended to scope firewall denial to particular workloads. It does not implement the required action to identify the effective matching firewall rule, even though both are relevant to the same general service.

C:

While this can authorize inbound packets with a matching rule, the present task requires an action to identify the effective matching firewall rule. This operation does not supply the behavior described in the requirements.

E:

The result of this choice would be to understand default outbound firewall behavior. The requested outcome, to identify the effective matching firewall rule, is handled at a different layer or through another operation.

Question 324

A network team wants to deny east-west traffic only for a specific class of instances. What should the administrator do?

  1. Add a narrowly scoped ingress allow firewall rule for the destination
  2. Review the implied egress allow behavior and explicit deny policies
  3. Evaluate the applicable firewall rule and policy priority order
  4. Use appropriate target selectors and destination or source ranges in a firewall rule
  5. Install a Cloud Armor edge policy on an external Application Load Balancer to block private VM-to-VM flows

Explanation

Correct Answer

D:

Targeting limits which VM interfaces are governed, while address and protocol criteria identify the traffic. A blanket VPC-wide deny could disrupt unrelated workloads.

Incorrect Answers

A:

This choice is useful to authorize inbound packets with a matching rule. The stated task is to filter selected internal traffic, which requires a different mechanism or permission scope.

B:

Using this action would understand default outbound firewall behavior, not filter selected internal traffic. Its function is different from the specific change described in the scenario.

C:

It can evaluate rule precedence based on priority; however, it does not provide the specific operation to filter selected internal traffic. The two controls serve different purposes.

E:

Cloud Armor policies on supported load balancers govern traffic at the protected load-balancing endpoint, not general east-west connections among arbitrary VPC instances. A scoped VPC firewall rule is needed.

Question 325

A web application wants only a managed external HTTPS frontend exposed, while its backends retain private addresses. Which solution should be used?

  1. Configure Private Google Access or a suitable private access option as required
  2. Plan a supported Cloud VPN or Interconnect connection with routes and firewall controls
  3. Create suitable Cloud NAT configuration for its egress traffic
  4. Use an external Application Load Balancer with eligible private backend instances and firewall permissions

Explanation

Correct Answer

D:

The load balancer provides public ingress while the backing VMs can remain privately addressed. Health-check and proxy ranges must be allowed as appropriate.

Incorrect Answers

A:

While this can reach Google APIs from private instances, the present task requires an action to isolate backend VMs behind a load balancer. This operation does not supply the behavior described in the requirements.

B:

This approach can provide controlled hybrid application access. The requirement is to isolate backend VMs behind a load balancer, so it controls a different part of the workflow and leaves that result unaddressed.

C:

Its purpose is to provide private VM internet egress. That distinction matters: the scenario calls for an action to isolate backend VMs behind a load balancer, not this separate configuration task.

Question 326

A private VM must download operating system updates from the internet without a public IP. How should the team proceed?

  1. Configure Private Google Access or a suitable private access option as required
  2. Create suitable Cloud NAT configuration for its egress traffic
  3. Choose a global external Application Load Balancer
  4. Use an external Application Load Balancer with eligible private backend instances and firewall permissions
  5. Plan a supported Cloud VPN or Interconnect connection with routes and firewall controls

Explanation

Correct Answer

B:

Cloud NAT performs outbound address translation and allows return traffic for eligible flows. It does not accept arbitrary new inbound internet connections.

Incorrect Answers

A:

The tool can reach Google APIs from private instances, but it cannot be substituted for the capability needed to download updates from a VM without external IP. Its operational effect is not equivalent.

C:

The choice is aimed at a different purpose: to route public web paths to backends; Even if it can load-balance global HTTP and HTTPS traffic, that would not accomplish the stated requirement to download updates from a VM without external IP.

D:

It can publish a public HTTPS endpoint without public VM NICs; however, it does not provide the specific operation to download updates from a VM without external IP. The two controls serve different purposes.

E:

Select this when the goal is to provide controlled hybrid application access. Here the decisive requirement is to download updates from a VM without external IP, and that outcome is not achieved by this action.

Question 327

A service must reach supported Google APIs using internal connectivity paths rather than general public internet routing. What is the most direct solution?

  1. Create suitable Cloud NAT configuration for its egress traffic
  2. Choose an internal Application Load Balancer
  3. Use an external Application Load Balancer with eligible private backend instances and firewall permissions
  4. Plan a supported Cloud VPN or Interconnect connection with routes and firewall controls
  5. Configure Private Google Access or a suitable private access option as required

Explanation

Correct Answer

E:

Private Google Access enables eligible VMs without external IPs to reach supported Google APIs using Google's network. It does not supply generic internet access to arbitrary hosts.

Incorrect Answers

A:

This approach can provide private VM internet egress. The requirement is to use private access to supported Google services, so it controls a different part of the workflow and leaves that result unaddressed.

B:

This alternative addresses external load balancer selection by allowing a team to route private HTTP requests; The incident, however, requires the different action to use private access to supported Google services, so its central configuration remains unchanged.

C:

This setting would publish a public HTTPS endpoint without public VM NICs. That behavior does not establish the requested ability to use private access to supported Google services; it addresses an adjacent concern instead.

D:

Its purpose is to provide controlled hybrid application access. That distinction matters: the scenario calls for an action to use private access to supported Google services, not this separate configuration task.

Question 328

An external partner must reach one private application over a dedicated authorized connectivity path. Which implementation matches this requirement?

  1. Create suitable Cloud NAT configuration for its egress traffic
  2. Use an external Application Load Balancer with eligible private backend instances and firewall permissions
  3. Plan a supported Cloud VPN or Interconnect connection with routes and firewall controls
  4. Configure Private Google Access or a suitable private access option as required
  5. Choose an eligible regional load balancer and verify backend-region requirements

Explanation

Correct Answer

C:

Hybrid connectivity joins external and VPC networks through planned transport. Additional routing and security policies are needed for the private application.

Incorrect Answers

A:

The result of this choice would be to provide private VM internet egress. The requested outcome, to connect a partner network to private services, is handled at a different layer or through another operation.

B:

Select this when the goal is to publish a public HTTPS endpoint without public VM NICs. Here the decisive requirement is to connect a partner network to private services, and that outcome is not achieved by this action.

D:

Administrators use it to reach Google APIs from private instances, rather than to connect a partner network to private services. Applying it would change the wrong component of this deployment.

E:

The technical effect is to align frontend and backend regional scope, not to connect a partner network to private services; That distinction matters here because the first operation serves plan regional load balancing placement, rather than the scenario's required result.

Question 329

A developer must understand why a subnet created in one region cannot be selected for a VM NIC in another region. Which action is most appropriate?

  1. Use separate VPC networks and add peering only if later explicitly needed
  2. Choose distinct nonoverlapping subnet address ranges
  3. Use a subnet located in the VM's region
  4. Choose an eligible regional load balancer and verify backend-region requirements

Explanation

Correct Answer

C:

Subnets are regional resources even though VPC networks are global. A VM's network interface attaches to a subnet in a compatible region.

Incorrect Answers

A:

Using this action would keep networks isolated until connectivity is approved, not fix region-mismatched VM NIC configuration. Its function is different from the specific change described in the scenario.

B:

This choice is useful to avoid overlapping CIDR allocation. The stated task is to fix region-mismatched VM NIC configuration, which requires a different mechanism or permission scope.

D:

It can align frontend and backend regional scope; however, it does not provide the specific operation to fix region-mismatched VM NIC configuration. The two controls serve different purposes.

Question 330

Two application subnets are being planned in the same VPC and their primary CIDRs overlap. Which solution should be used?

  1. Use a subnet located in the VM's region
  2. Create separate custom VPC networks for the teams
  3. Use separate VPC networks and add peering only if later explicitly needed
  4. Choose an eligible regional load balancer and verify backend-region requirements
  5. Choose distinct nonoverlapping subnet address ranges

Explanation

Correct Answer

E:

Conflicting primary ranges cannot coexist in one VPC. Planning ranges early avoids disruptive later renumbering.

Incorrect Answers

A:

This mechanism is intended to match VM placement to subnet region. It does not implement the required action to create valid private subnet plans, even though both are relevant to the same general service.

B:

The result of this choice would be to isolate team networking into separate VPCs. The requested outcome, to create valid private subnet plans, is handled at a different layer or through another operation.

C:

While this can keep networks isolated until connectivity is approved, the present task requires an action to create valid private subnet plans. This operation does not supply the behavior described in the requirements.

D:

Administrators use it to align frontend and backend regional scope, rather than to create valid private subnet plans. Applying it would change the wrong component of this deployment.

Associate Cloud Engineer Practice Tests