Google Associate Cloud Engineer Practice Test 32

Question 310

An internal service exposes a custom TCP protocol rather than HTTP, and backends must see the original source IP. Which internal load-balancing family best fits the request?

  1. Use a global external Application Load Balancer
  2. Use an internal passthrough Network Load Balancer
  3. Use an internal Application Load Balancer with URL maps and path rules
  4. Use Cloud DNS forwarding alone instead of a forwarding rule

Explanation

Correct Answer

B:

An internal passthrough Network Load Balancer distributes supported TCP or UDP traffic at the network layer while preserving relevant packet addressing for its backends.

Incorrect Answers

A:

A global external Application Load Balancer is designed for external application-layer access. It fails both the private-only requirement and raw TCP passthrough behavior.

C:

Internal Application Load Balancers proxy supported application-layer requests such as HTTP. They are not the right choice for an arbitrary raw TCP protocol that requires passthrough semantics.

D:

DNS forwarding resolves hostnames and can point clients to a service address. It does not perform transport-level load balancing across backend instances.

Question 311

An application wants a stable backend set that automatically excludes unhealthy VM replicas. Which approach should be selected?

  1. Configure a load balancer backend service with the appropriate health check
  2. Choose an internal passthrough Network Load Balancer
  3. Reserve a compatible static address for its frontend forwarding rule
  4. Use a regional or cross-region internal Application Load Balancer as suitable

Explanation

Correct Answer

A:

Health checks determine backend eligibility for traffic serving. They are separate from the forwarding rule that accepts frontend connections.

Incorrect Answers

B:

This mechanism is intended to balance private layer-4 traffic. It does not implement the required action to stop sending traffic to unhealthy VMs, even though both are relevant to the same general service.

C:

While this can configure a stable load-balancer frontend, the present task requires an action to stop sending traffic to unhealthy VMs. This operation does not supply the behavior described in the requirements.

D:

The result of this choice would be to route internal HTTP requests by URL. The requested outcome, to stop sending traffic to unhealthy VMs, is handled at a different layer or through another operation.

Question 312

A public service needs a reserved entry-point IP that can be associated with the load balancer. Which method addresses the task?

  1. Create separate custom VPC networks for the teams
  2. Use a regional or cross-region internal Application Load Balancer as suitable
  3. Choose an internal passthrough Network Load Balancer
  4. Reserve a compatible static address for its frontend forwarding rule
  5. Configure a load balancer backend service with the appropriate health check

Explanation

Correct Answer

D:

Forwarding rules bind frontend addresses and protocols to backend service configurations. A reserved address helps maintain a stable endpoint.

Incorrect Answers

A:

Using this action would isolate team networking into separate VPCs, not keep the public entry IP fixed. Its function is different from the specific change described in the scenario.

B:

This choice is useful to route internal HTTP requests by URL. The stated task is to keep the public entry IP fixed, which requires a different mechanism or permission scope.

C:

It can balance private layer-4 traffic; however, it does not provide the specific operation to keep the public entry IP fixed. The two controls serve different purposes.

E:

The tool can health-check load balancing backends, but it cannot be substituted for the capability needed to keep the public entry IP fixed. Its operational effect is not equivalent.

Question 313

A global internet service wants traffic to use Google's premium backbone as early as practical. Which implementation matches this requirement?

  1. Use Premium Tier for supported external traffic
  2. Evaluate Standard Tier where supported
  3. Check the load-balancer and tier compatibility matrix before designing global ingress
  4. Treat service tier selection as an external network routing and pricing concern

Explanation

Correct Answer

A:

Premium Tier favors Google's global backbone and supports global external load-balancing designs. It differs from lower-cost regional routing patterns.

Incorrect Answers

B:

This approach can choose a cost-oriented regional network tier. The requirement is to optimize a global external service network tier, so it controls a different part of the workflow and leaves that result unaddressed.

C:

While this can validate tier compatibility with global load balancing, the present task requires an action to optimize a global external service network tier. This operation does not supply the behavior described in the requirements.

D:

Its purpose is to distinguish external service tier from internal routing. That distinction matters: the scenario calls for an action to optimize a global external service network tier, not this separate configuration task.

Question 314

A regional public endpoint prioritizes lower network cost over Premium's global routing behavior. What should the administrator do?

  1. Check the load-balancer and tier compatibility matrix before designing global ingress
  2. Treat service tier selection as an external network routing and pricing concern
  3. Evaluate Standard Tier where supported
  4. Use Premium Tier for supported external traffic
  5. Configure a load balancer backend service with the appropriate health check

Explanation

Correct Answer

C:

Standard Tier uses a more regional internet egress model with different product compatibility. It does not provide every global frontend option.

Incorrect Answers

A:

The tool can validate tier compatibility with global load balancing, but it cannot be substituted for the capability needed to run a regional external endpoint on Standard Tier. Its operational effect is not equivalent.

B:

This mechanism is intended to distinguish external service tier from internal routing. It does not implement the required action to run a regional external endpoint on Standard Tier, even though both are relevant to the same general service.

D:

Select this when the goal is to use Google's premium global network path. Here the decisive requirement is to run a regional external endpoint on Standard Tier, and that outcome is not achieved by this action.

E:

An operator would use this action to health-check load balancing backends, chiefly when trying to stop sending traffic to unhealthy VMs; The current requirement is to run a regional external endpoint on Standard Tier, which remains unresolved by that operation.

Question 315

An architect is comparing two tiers and wants to know if choosing Standard enables a global anycast frontend identical to Premium. Which choice provides the required behavior?

  1. Use a supported regional network firewall policy
  2. Treat service tier selection as an external network routing and pricing concern
  3. Use Premium Tier for supported external traffic
  4. Evaluate Standard Tier where supported
  5. Check the load-balancer and tier compatibility matrix before designing global ingress

Explanation

Correct Answer

E:

Global external Application Load Balancers require compatible premium networking designs. Standard Tier has regional constraints for several frontend choices.

Incorrect Answers

A:

For the stated need to avoid an unsupported global Standard Tier combination, this would instead manage a regional network firewall policy; it supports the separate task to group region-scoped network security rules, not the required configuration.

B:

This setting would distinguish external service tier from internal routing. That behavior does not establish the requested ability to avoid an unsupported global Standard Tier combination; it addresses an adjacent concern instead.

C:

Using this action would use Google's premium global network path, not avoid an unsupported global Standard Tier combination. Its function is different from the specific change described in the scenario.

D:

This approach can choose a cost-oriented regional network tier. The requirement is to avoid an unsupported global Standard Tier combination, so it controls a different part of the workflow and leaves that result unaddressed.

Question 316

An engineer assumes Network Service Tiers alter all private VPC east-west packet behavior. Which approach should be selected?

  1. Treat service tier selection as an external network routing and pricing concern
  2. Check the load-balancer and tier compatibility matrix before designing global ingress
  3. Use Premium Tier for supported external traffic
  4. Choose an internal Application Load Balancer
  5. Evaluate Standard Tier where supported

Explanation

Correct Answer

A:

Network Service Tiers primarily affect supported internet-facing networking paths and services. They are not a substitute for VPC routes or firewall rules.

Incorrect Answers

B:

Select this when the goal is to validate tier compatibility with global load balancing. Here the decisive requirement is to avoid using network tiers as a private routing control, and that outcome is not achieved by this action.

C:

Administrators use it to use Google's premium global network path, rather than to avoid using network tiers as a private routing control. Applying it would change the wrong component of this deployment.

D:

In a workflow for external load balancer selection, it can route private HTTP requests; This question instead asks how to avoid using network tiers as a private routing control; substituting the former action would leave that distinct technical requirement unmet.

E:

This mechanism is intended to choose a cost-oriented regional network tier. It does not implement the required action to avoid using network tiers as a private routing control, even though both are relevant to the same general service.

Question 317

An on-premises site needs VPN redundancy that can meet a high-availability design when correctly configured. What is the most direct solution?

  1. Evaluate HA VPN over Cloud Interconnect
  2. Deploy HA VPN with the required interface and peer topology
  3. Pair the attachment with Cloud Router BGP configuration
  4. Plan independent redundant Interconnect or partner connections per the required topology

Explanation

Correct Answer

B:

HA VPN supports multiple interfaces and BGP-based routing for resilient connectivity. A single tunnel does not qualify for all stated availability guarantees.

Incorrect Answers

A:

This choice is useful to encrypt traffic over Interconnect. The stated task is to reduce single-tunnel hybrid outages, which requires a different mechanism or permission scope.

C:

It can exchange dynamic hybrid routes for Interconnect; however, it does not provide the specific operation to reduce single-tunnel hybrid outages. The two controls serve different purposes.

D:

Using this action would design redundant private connectivity paths, not reduce single-tunnel hybrid outages. Its function is different from the specific change described in the scenario.

Question 318

A data center link must exchange network prefixes dynamically with a Google Cloud Interconnect attachment. Which implementation matches this requirement?

  1. Deploy HA VPN with the required interface and peer topology
  2. Plan a supported Cloud VPN or Interconnect connection with routes and firewall controls
  3. Evaluate HA VPN over Cloud Interconnect
  4. Pair the attachment with Cloud Router BGP configuration
  5. Plan independent redundant Interconnect or partner connections per the required topology

Explanation

Correct Answer

D:

Cloud Router exchanges prefixes for eligible interconnect or VPN attachments. A VLAN attachment alone does not provide the needed route advertisement.

Incorrect Answers

A:

Its purpose is to use a redundant HA VPN topology. That distinction matters: the scenario calls for an action to advertise prefixes over a private connection, not this separate configuration task.

B:

For the stated need to advertise prefixes over a private connection, this would instead provide controlled hybrid application access; it supports the separate task to connect a partner network to private services, not the required configuration.

C:

The result of this choice would be to encrypt traffic over Interconnect. The requested outcome, to advertise prefixes over a private connection, is handled at a different layer or through another operation.

E:

While this can design redundant private connectivity paths, the present task requires an action to advertise prefixes over a private connection. This operation does not supply the behavior described in the requirements.

Question 319

A hybrid administrator requires encrypted traffic while using Cloud Interconnect capacity. What should the administrator do?

  1. Deploy Cloud VPN with a suitable supported tunnel configuration
  2. Evaluate HA VPN over Cloud Interconnect
  3. Deploy HA VPN with the required interface and peer topology
  4. Plan independent redundant Interconnect or partner connections per the required topology
  5. Pair the attachment with Cloud Router BGP configuration

Explanation

Correct Answer

B:

This architecture combines Interconnect transport with IPsec encryption. Dedicated connectivity by itself is not equivalent to adding end-to-end IPsec over the link.

Incorrect Answers

A:

In a workflow for network connectivity choices, it can encrypt hybrid traffic over IPsec; This question instead asks how to combine private capacity with VPN encryption; substituting the former action would leave that distinct technical requirement unmet.

C:

This choice is useful to use a redundant HA VPN topology. The stated task is to combine private capacity with VPN encryption, which requires a different mechanism or permission scope.

D:

Select this when the goal is to design redundant private connectivity paths. Here the decisive requirement is to combine private capacity with VPN encryption, and that outcome is not achieved by this action.

E:

The tool can exchange dynamic hybrid routes for Interconnect, but it cannot be substituted for the capability needed to combine private capacity with VPN encryption. Its operational effect is not equivalent.

Question 320

A private site-to-cloud connection needs resilient physical paths rather than only redundant routing sessions on one link. Which choice provides the required behavior?

  1. Plan independent redundant Interconnect or partner connections per the required topology
  2. Treat service tier selection as an external network routing and pricing concern
  3. Evaluate HA VPN over Cloud Interconnect
  4. Deploy HA VPN with the required interface and peer topology
  5. Pair the attachment with Cloud Router BGP configuration

Explanation

Correct Answer

A:

Physical connection redundancy addresses circuit and location failures. Duplicate BGP sessions over a single failed physical connection cannot restore transport.

Incorrect Answers

B:

The choice is aimed at a different purpose: to avoid using network tiers as a private routing control; Even if it can distinguish external service tier from internal routing, that would not accomplish the stated requirement to protect hybrid links against physical failures.

C:

Its purpose is to encrypt traffic over Interconnect. That distinction matters: the scenario calls for an action to protect hybrid links against physical failures, not this separate configuration task.

D:

This approach can use a redundant HA VPN topology. The requirement is to protect hybrid links against physical failures, so it controls a different part of the workflow and leaves that result unaddressed.

E:

This setting would exchange dynamic hybrid routes for Interconnect. That behavior does not establish the requested ability to protect hybrid links against physical failures; it addresses an adjacent concern instead.

Associate Cloud Engineer Practice Tests