ECCouncil 312-38 (Certified Network Defender) Practice Test 76

Question 750

To determine whether unexpected multicast or DNS dominates a trace, what would a network traffic analyst implement or use?

  1. Conversation statistics
  2. TCP sequence graph
  3. Expert Information review
  4. Protocol hierarchy statistics
  5. Follow TCP stream

Explanation

Correct Answer

D:

Protocol summaries quantify dissected frame proportions without requiring manual packet counting; this mechanism directly supports the requirement to determine whether unexpected multicast or DNS dominates a trace.

Incorrect Answers

A:

Conversation views summarize communicating pairs and traffic volumes to guide focused analysis; that is useful when the task is to find the two endpoints exchanging the highest byte counts in a packet capture, not the stated requirement to determine whether unexpected multicast or DNS dominates a trace.

B:

Time-sequence plots reveal pacing, loss and recovery characteristics across a selected flow; a team would select it to visualize throughput stalls and repeated retransmissions over time, which does not provide the particular result to determine whether unexpected multicast or DNS dominates a trace.

C:

Wireshark diagnostic annotations highlight noteworthy conditions but are not proof of compromise; its operational purpose is to locate malformed frames and transport anomalies in a large capture, not to achieve the specific requirement to determine whether unexpected multicast or DNS dominates a trace.

E:

Stream reassembly orders related TCP payload bytes when the capture is sufficiently complete; it addresses the different need to reconstruct a single unencrypted application conversation from captured packets, leaving the requested ability to determine whether unexpected multicast or DNS dominates a trace unresolved.

Question 751

To reconstruct a single unencrypted application conversation from captured packets, which practice addresses that objective?

  1. Display filter ip.addr
  2. Display filter tcp.flags.syn
  3. Follow TCP stream
  4. TCP sequence graph

Explanation

Correct Answer

C:

Stream reassembly orders related TCP payload bytes when the capture is sufficiently complete; it supplies the specific control needed to reconstruct a single unencrypted application conversation from captured packets.

Incorrect Answers

A:

Address predicates help correlate both directions of traffic for one IPv4 endpoint; it could help someone trying to limit packet review to frames sent by or addressed to a suspect host, but the problem is instead to reconstruct a single unencrypted application conversation from captured packets.

B:

Field expressions inspect header flags within existing captures rather than altering live firewall policy; that is useful when the task is to isolate SYN-bearing TCP packets for connection-attempt analysis, not the stated requirement to reconstruct a single unencrypted application conversation from captured packets.

D:

Time-sequence plots reveal pacing, loss and recovery characteristics across a selected flow; its operational purpose is to visualize throughput stalls and repeated retransmissions over time, not to achieve the specific requirement to reconstruct a single unencrypted application conversation from captured packets.

Question 752

To locate malformed frames and transport anomalies in a large capture, which tool, policy, or technique is appropriate?

  1. Display filter tcp.flags.syn
  2. Protocol hierarchy statistics
  3. Follow TCP stream
  4. Expert Information review

Explanation

Correct Answer

D:

Wireshark diagnostic annotations highlight noteworthy conditions but are not proof of compromise; that is why it addresses the operational task to locate malformed frames and transport anomalies in a large capture.

Incorrect Answers

A:

Field expressions inspect header flags within existing captures rather than altering live firewall policy; although relevant to isolate SYN-bearing TCP packets for connection-attempt analysis, it does not by itself achieve the required task to locate malformed frames and transport anomalies in a large capture.

B:

Protocol summaries quantify dissected frame proportions without requiring manual packet counting; it could help someone trying to determine whether unexpected multicast or DNS dominates a trace, but the problem is instead to locate malformed frames and transport anomalies in a large capture.

C:

Stream reassembly orders related TCP payload bytes when the capture is sufficiently complete; that is useful when the task is to reconstruct a single unencrypted application conversation from captured packets, not the stated requirement to locate malformed frames and transport anomalies in a large capture.

Question 753

To visualize throughput stalls and repeated retransmissions over time, what safeguard would be most applicable?

  1. TCP sequence graph
  2. Packet export objects
  3. Display filter dns.flags.rcode
  4. Follow TCP stream

Explanation

Correct Answer

A:

Time-sequence plots reveal pacing, loss and recovery characteristics across a selected flow; its relevant protective or investigative effect is to visualize throughput stalls and repeated retransmissions over time.

Incorrect Answers

B:

Object export reconstructs recognizable content only when protocols and capture completeness permit it; although relevant to recover transferred files from supported decoded application sessions, it does not by itself achieve the required task to visualize throughput stalls and repeated retransmissions over time.

C:

Response-code filtering distinguishes unsuccessful resolution states for investigation; it could help someone trying to find DNS responses showing server failures or nonexistent names, but the problem is instead to visualize throughput stalls and repeated retransmissions over time.

D:

Stream reassembly orders related TCP payload bytes when the capture is sufficiently complete; that is useful when the task is to reconstruct a single unencrypted application conversation from captured packets, not the stated requirement to visualize throughput stalls and repeated retransmissions over time.

Question 754

To isolate SYN-bearing TCP packets for connection-attempt analysis, what is the relevant defensive action?

  1. TCP sequence graph
  2. Expert Information review
  3. Display filter tcp.flags.syn
  4. Display filter dns.flags.rcode

Explanation

Correct Answer

C:

Field expressions inspect header flags within existing captures rather than altering live firewall policy; the requested outcome is precisely to isolate SYN-bearing TCP packets for connection-attempt analysis.

Incorrect Answers

A:

Time-sequence plots reveal pacing, loss and recovery characteristics across a selected flow; its mechanism supports visualize throughput stalls and repeated retransmissions over time, while the requested control must be able to isolate SYN-bearing TCP packets for connection-attempt analysis.

B:

Wireshark diagnostic annotations highlight noteworthy conditions but are not proof of compromise; the outcome it supports is to locate malformed frames and transport anomalies in a large capture, whereas this scenario asks defenders to isolate SYN-bearing TCP packets for connection-attempt analysis.

D:

Response-code filtering distinguishes unsuccessful resolution states for investigation; it could help someone trying to find DNS responses showing server failures or nonexistent names, but the problem is instead to isolate SYN-bearing TCP packets for connection-attempt analysis.

Question 755

To find DNS responses showing server failures or nonexistent names, which option most directly provides the capability?

  1. Display filter dns.flags.rcode
  2. TCP sequence graph
  3. Traffic capture minimization
  4. Protocol hierarchy statistics
  5. Display filter ip.addr

Explanation

Correct Answer

A:

Response-code filtering distinguishes unsuccessful resolution states for investigation; this choice fits the scenario because the team must find DNS responses showing server failures or nonexistent names.

Incorrect Answers

B:

Time-sequence plots reveal pacing, loss and recovery characteristics across a selected flow; its mechanism supports visualize throughput stalls and repeated retransmissions over time, while the requested control must be able to find DNS responses showing server failures or nonexistent names.

C:

Scoped filters and retention controls reduce privacy exposure while preserving necessary evidence; the outcome it supports is to avoid collecting unrelated employee payloads during a targeted network investigation, whereas this scenario asks defenders to find DNS responses showing server failures or nonexistent names.

D:

Protocol summaries quantify dissected frame proportions without requiring manual packet counting; although relevant to determine whether unexpected multicast or DNS dominates a trace, it does not by itself achieve the required task to find DNS responses showing server failures or nonexistent names.

E:

Address predicates help correlate both directions of traffic for one IPv4 endpoint; it could help someone trying to limit packet review to frames sent by or addressed to a suspect host, but the problem is instead to find DNS responses showing server failures or nonexistent names.

Question 756

To limit packet review to frames sent by or addressed to a suspect host, which control achieves the target outcome?

  1. Traffic capture minimization
  2. Display filter dns.flags.rcode
  3. Display filter ip.addr
  4. Display filter tcp.flags.syn

Explanation

Correct Answer

C:

Address predicates help correlate both directions of traffic for one IPv4 endpoint; this mechanism directly supports the requirement to limit packet review to frames sent by or addressed to a suspect host.

Incorrect Answers

A:

Scoped filters and retention controls reduce privacy exposure while preserving necessary evidence; it addresses the different need to avoid collecting unrelated employee payloads during a targeted network investigation, leaving the requested ability to limit packet review to frames sent by or addressed to a suspect host unresolved.

B:

Response-code filtering distinguishes unsuccessful resolution states for investigation; the technique works for situations involving find DNS responses showing server failures or nonexistent names, rather than this need to limit packet review to frames sent by or addressed to a suspect host.

D:

Field expressions inspect header flags within existing captures rather than altering live firewall policy; the outcome it supports is to isolate SYN-bearing TCP packets for connection-attempt analysis, whereas this scenario asks defenders to limit packet review to frames sent by or addressed to a suspect host.

Question 757

To recover transferred files from supported decoded application sessions, which solution should be adopted?

  1. Packet export objects
  2. Display filter ip.addr
  3. Display filter dns.flags.rcode
  4. Display filter tcp.flags.syn

Explanation

Correct Answer

A:

Object export reconstructs recognizable content only when protocols and capture completeness permit it; it supplies the specific control needed to recover transferred files from supported decoded application sessions.

Incorrect Answers

B:

Address predicates help correlate both directions of traffic for one IPv4 endpoint; it addresses the different need to limit packet review to frames sent by or addressed to a suspect host, leaving the requested ability to recover transferred files from supported decoded application sessions unresolved.

C:

Response-code filtering distinguishes unsuccessful resolution states for investigation; the technique works for situations involving find DNS responses showing server failures or nonexistent names, rather than this need to recover transferred files from supported decoded application sessions.

D:

Field expressions inspect header flags within existing captures rather than altering live firewall policy; its mechanism supports isolate SYN-bearing TCP packets for connection-attempt analysis, while the requested control must be able to recover transferred files from supported decoded application sessions.

Question 758

To preserve chain-of-custody confidence when transferring a PCAP to investigators, which of the available controls is suitable?

  1. Display filter tcp.flags.syn
  2. Display filter ip.addr
  3. Traffic capture minimization
  4. Capture file hashing

Explanation

Correct Answer

D:

Digest records help prove evidence bytes remained unchanged after acquisition; that is why it addresses the operational task to preserve chain-of-custody confidence when transferring a PCAP to investigators.

Incorrect Answers

A:

Field expressions inspect header flags within existing captures rather than altering live firewall policy; its operational purpose is to isolate SYN-bearing TCP packets for connection-attempt analysis, not to achieve the specific requirement to preserve chain-of-custody confidence when transferring a PCAP to investigators.

B:

Address predicates help correlate both directions of traffic for one IPv4 endpoint; applying it would serve limit packet review to frames sent by or addressed to a suspect host without directly satisfying the goal to preserve chain-of-custody confidence when transferring a PCAP to investigators.

C:

Scoped filters and retention controls reduce privacy exposure while preserving necessary evidence; it addresses the different need to avoid collecting unrelated employee payloads during a targeted network investigation, leaving the requested ability to preserve chain-of-custody confidence when transferring a PCAP to investigators unresolved.

Question 759

To recover transferred files from supported decoded application sessions, to preserve chain-of-custody confidence when transferring a PCAP to investigators, and to avoid collecting unrelated employee payloads during a targeted network investigation, which THREE measures should the team select? Choose THREE.

  1. Traffic capture minimization
  2. Capture file hashing
  3. Display filter ip.addr
  4. Packet export objects
  5. Display filter dns.flags.rcode
  6. Display filter tcp.flags.syn

Explanation

Correct Answers

A:

Scoped filters and retention controls reduce privacy exposure while preserving necessary evidence; this is the measure that can avoid collecting unrelated employee payloads during a targeted network investigation as one of the separately stated outcomes.

B:

Digest records help prove evidence bytes remained unchanged after acquisition; this is the measure that can preserve chain-of-custody confidence when transferring a PCAP to investigators as one of the separately stated outcomes.

D:

Object export reconstructs recognizable content only when protocols and capture completeness permit it; this is the measure that can recover transferred files from supported decoded application sessions as one of the separately stated outcomes.

Incorrect Answers

C:

Address predicates help correlate both directions of traffic for one IPv4 endpoint; applying it would serve limit packet review to frames sent by or addressed to a suspect host without directly satisfying the goal to recover transferred files from supported decoded application sessions, to preserve chain-of-custody confidence when transferring a PCAP to investigators, and to avoid collecting unrelated employee payloads during a targeted network investigation.

E:

Response-code filtering distinguishes unsuccessful resolution states for investigation; the technique works for situations involving find DNS responses showing server failures or nonexistent names, rather than this need to recover transferred files from supported decoded application sessions, to preserve chain-of-custody confidence when transferring a PCAP to investigators, and to avoid collecting unrelated employee payloads during a targeted network investigation.

F:

Field expressions inspect header flags within existing captures rather than altering live firewall policy; its mechanism supports isolate SYN-bearing TCP packets for connection-attempt analysis, while the requested control must be able to recover transferred files from supported decoded application sessions, to preserve chain-of-custody confidence when transferring a PCAP to investigators, and to avoid collecting unrelated employee payloads during a targeted network investigation.

Question 760

To separate physical link faults from malicious packet drops, which option is the direct technical match?

  1. Throughput-versus-bandwidth distinction
  2. Jitter measurement
  3. QoS queue monitoring
  4. Round-trip latency monitoring
  5. Interface error counters
  6. Packet-loss measurement

Explanation

Correct Answer

E:

CRC errors and discards provide clues to media or congestion issues outside IP application logs; the requested outcome is precisely to separate physical link faults from malicious packet drops.

Incorrect Answers

A:

Protocol overhead, congestion and endpoints reduce achieved throughput beneath nominal link capacity; that is useful when the task is to avoid assuming a gigabit link always delivers one gigabit of application data, not the stated requirement to separate physical link faults from malicious packet drops.

B:

Variation in packet delay affects real-time playback buffers and interactive communication; a team would select it to explain inconsistent voice-call quality even when average latency looks acceptable, which does not provide the particular result to separate physical link faults from malicious packet drops.

C:

Queue drop and latency metrics show whether traffic classification and scheduling meet service goals; its operational purpose is to detect priority voice traffic starved by a misconfigured egress scheduler, not to achieve the specific requirement to separate physical link faults from malicious packet drops.

D:

RTT trends reveal timing degradation but cannot alone locate which hop or endpoint caused it; applying it would serve identify a remote network path with rising delay during business hours without directly satisfying the goal to separate physical link faults from malicious packet drops.

F:

Loss rates and direction measurements distinguish reliability problems from pure server processing delay; the technique works for situations involving determine whether unstable application sessions coincide with dropped network traffic, rather than this need to separate physical link faults from malicious packet drops.

Certified Network Defender (312-38) Practice Tests