ECCouncil 312-38 (Certified Network Defender) Practice Test 43

Question 420

To remove unused telnet and web management daemons from sensors, which tool, policy, or technique is appropriate?

  1. Memory-safe firmware review
  2. Secure element access control
  3. Watchdog timer
  4. Protocol fuzz testing
  5. Least-functionality firmware

Explanation

Correct Answer

E:

Minimal services reduce reachable vulnerabilities on devices with limited patch support; this mechanism directly supports the requirement to remove unused telnet and web management daemons from sensors.

Incorrect Answers

A:

Safe-language and boundary-checking practices prevent common corruption classes before deployment; that is useful when the task is to reduce buffer-overflow risk in newly developed device parsers, not the stated requirement to remove unused telnet and web management daemons from sensors.

B:

Protected key APIs prevent broad extraction while still supporting approved cryptographic operations; a team would select it to restrict which firmware component may use the device identity key, which does not provide the particular result to remove unused telnet and web management daemons from sensors.

C:

A hardware or software watchdog restarts a nonresponsive component to support availability; its operational purpose is to recover an embedded service stuck in an unrecoverable software state, not to achieve the specific requirement to remove unused telnet and web management daemons from sensors.

D:

Controlled malformed-input testing reveals robustness defects before exposed deployment; applying it would serve find failures in an IoT parser receiving malformed telemetry frames without directly satisfying the goal to remove unused telnet and web management daemons from sensors.

Question 421

To reduce buffer-overflow risk in newly developed device parsers, what safeguard would be most applicable?

  1. Secure element access control
  2. Memory-safe firmware review
  3. Watchdog timer
  4. Least-functionality firmware

Explanation

Correct Answer

B:

Safe-language and boundary-checking practices prevent common corruption classes before deployment; it supplies the specific control needed to reduce buffer-overflow risk in newly developed device parsers.

Incorrect Answers

A:

Protected key APIs prevent broad extraction while still supporting approved cryptographic operations; it could help someone trying to restrict which firmware component may use the device identity key, but the problem is instead to reduce buffer-overflow risk in newly developed device parsers.

C:

A hardware or software watchdog restarts a nonresponsive component to support availability; a team would select it to recover an embedded service stuck in an unrecoverable software state, which does not provide the particular result to reduce buffer-overflow risk in newly developed device parsers.

D:

Minimal services reduce reachable vulnerabilities on devices with limited patch support; its operational purpose is to remove unused telnet and web management daemons from sensors, not to achieve the specific requirement to reduce buffer-overflow risk in newly developed device parsers.

Question 422

To alert operators when an outdoor sensor enclosure is opened unexpectedly, what is the relevant defensive action?

  1. Secure element access control
  2. Least-functionality firmware
  3. IoT intrusion detection
  4. Physical tamper detection

Explanation

Correct Answer

D:

Tamper switches or seals provide physical evidence not visible in network authentication logs; that is why it addresses the operational task to alert operators when an outdoor sensor enclosure is opened unexpectedly.

Incorrect Answers

A:

Protected key APIs prevent broad extraction while still supporting approved cryptographic operations; although relevant to restrict which firmware component may use the device identity key, it does not by itself achieve the required task to alert operators when an outdoor sensor enclosure is opened unexpectedly.

B:

Minimal services reduce reachable vulnerabilities on devices with limited patch support; it could help someone trying to remove unused telnet and web management daemons from sensors, but the problem is instead to alert operators when an outdoor sensor enclosure is opened unexpectedly.

C:

Protocol-aware or flow-based detection models behaviors uncommon for a device role; that is useful when the task is to alert on lateral scanning originating from low-power appliances, not the stated requirement to alert operators when an outdoor sensor enclosure is opened unexpectedly.

Question 423

To restrict which firmware component may use the device identity key, which option most directly provides the capability?

  1. Physical tamper detection
  2. Secure element access control
  3. Memory-safe firmware review
  4. Safety fail-safe design

Explanation

Correct Answer

B:

Protected key APIs prevent broad extraction while still supporting approved cryptographic operations; its relevant protective or investigative effect is to restrict which firmware component may use the device identity key.

Incorrect Answers

A:

Tamper switches or seals provide physical evidence not visible in network authentication logs; the outcome it supports is to alert operators when an outdoor sensor enclosure is opened unexpectedly, whereas this scenario asks defenders to restrict which firmware component may use the device identity key.

C:

Safe-language and boundary-checking practices prevent common corruption classes before deployment; it could help someone trying to reduce buffer-overflow risk in newly developed device parsers, but the problem is instead to restrict which firmware component may use the device identity key.

D:

Fail-safe operation considers physical consequences rather than simply restarting network services; that is useful when the task is to place an industrial actuator in a safe condition if control messages are lost, not the stated requirement to restrict which firmware component may use the device identity key.

Question 424

To find failures in an IoT parser receiving malformed telemetry frames, which control achieves the target outcome?

  1. Memory-safe firmware review
  2. Protocol fuzz testing
  3. Remote management jump path
  4. Safety fail-safe design

Explanation

Correct Answer

B:

Controlled malformed-input testing reveals robustness defects before exposed deployment; the requested outcome is precisely to find failures in an IoT parser receiving malformed telemetry frames.

Incorrect Answers

A:

Safe-language and boundary-checking practices prevent common corruption classes before deployment; its mechanism supports reduce buffer-overflow risk in newly developed device parsers, while the requested control must be able to find failures in an IoT parser receiving malformed telemetry frames.

C:

A controlled management gateway provides auditable access to restricted device administration interfaces; although relevant to keep embedded web consoles inaccessible from ordinary office clients, it does not by itself achieve the required task to find failures in an IoT parser receiving malformed telemetry frames.

D:

Fail-safe operation considers physical consequences rather than simply restarting network services; it could help someone trying to place an industrial actuator in a safe condition if control messages are lost, but the problem is instead to find failures in an IoT parser receiving malformed telemetry frames.

Question 425

To alert on lateral scanning originating from low-power appliances, which solution should be adopted?

  1. Protocol fuzz testing
  2. IoT intrusion detection
  3. DNS destination allowlist
  4. Device rate limiting
  5. Secure element access control

Explanation

Correct Answer

B:

Protocol-aware or flow-based detection models behaviors uncommon for a device role; this choice fits the scenario because the team must alert on lateral scanning originating from low-power appliances.

Incorrect Answers

A:

Controlled malformed-input testing reveals robustness defects before exposed deployment; the technique works for situations involving find failures in an IoT parser receiving malformed telemetry frames, rather than this need to alert on lateral scanning originating from low-power appliances.

C:

Name and egress policy constrain cloud communication beyond the manufacturer's approved endpoints; the outcome it supports is to prevent internet-connected cameras contacting unapproved remote domains, whereas this scenario asks defenders to alert on lateral scanning originating from low-power appliances.

D:

Per-device quotas protect shared ingestion capacity without blocking every well-behaved peer; although relevant to stop a malfunctioning sensor overwhelming its broker with telemetry, it does not by itself achieve the required task to alert on lateral scanning originating from low-power appliances.

E:

Protected key APIs prevent broad extraction while still supporting approved cryptographic operations; it could help someone trying to restrict which firmware component may use the device identity key, but the problem is instead to alert on lateral scanning originating from low-power appliances.

Question 426

To place an industrial actuator in a safe condition if control messages are lost, which of the available controls is suitable?

  1. IoT intrusion detection
  2. Device rate limiting
  3. Remote management jump path
  4. Safety fail-safe design

Explanation

Correct Answer

D:

Fail-safe operation considers physical consequences rather than simply restarting network services; this mechanism directly supports the requirement to place an industrial actuator in a safe condition if control messages are lost.

Incorrect Answers

A:

Protocol-aware or flow-based detection models behaviors uncommon for a device role; it addresses the different need to alert on lateral scanning originating from low-power appliances, leaving the requested ability to place an industrial actuator in a safe condition if control messages are lost unresolved.

B:

Per-device quotas protect shared ingestion capacity without blocking every well-behaved peer; the technique works for situations involving stop a malfunctioning sensor overwhelming its broker with telemetry, rather than this need to place an industrial actuator in a safe condition if control messages are lost.

C:

A controlled management gateway provides auditable access to restricted device administration interfaces; its mechanism supports keep embedded web consoles inaccessible from ordinary office clients, while the requested control must be able to place an industrial actuator in a safe condition if control messages are lost.

Question 427

To keep embedded web consoles inaccessible from ordinary office clients, which option is the direct technical match?

  1. Remote management jump path
  2. DNS destination allowlist
  3. Physical tamper detection
  4. IoT intrusion detection

Explanation

Correct Answer

A:

A controlled management gateway provides auditable access to restricted device administration interfaces; it supplies the specific control needed to keep embedded web consoles inaccessible from ordinary office clients.

Incorrect Answers

B:

Name and egress policy constrain cloud communication beyond the manufacturer's approved endpoints; it addresses the different need to prevent internet-connected cameras contacting unapproved remote domains, leaving the requested ability to keep embedded web consoles inaccessible from ordinary office clients unresolved.

C:

Tamper switches or seals provide physical evidence not visible in network authentication logs; the technique works for situations involving alert operators when an outdoor sensor enclosure is opened unexpectedly, rather than this need to keep embedded web consoles inaccessible from ordinary office clients.

D:

Protocol-aware or flow-based detection models behaviors uncommon for a device role; its mechanism supports alert on lateral scanning originating from low-power appliances, while the requested control must be able to keep embedded web consoles inaccessible from ordinary office clients.

Question 428

To stop a malfunctioning sensor overwhelming its broker with telemetry, which approach should a IoT security operator choose?

  1. Safety fail-safe design
  2. Device rate limiting
  3. DNS destination allowlist
  4. Protocol fuzz testing

Explanation

Correct Answer

B:

Per-device quotas protect shared ingestion capacity without blocking every well-behaved peer; that is why it addresses the operational task to stop a malfunctioning sensor overwhelming its broker with telemetry.

Incorrect Answers

A:

Fail-safe operation considers physical consequences rather than simply restarting network services; its operational purpose is to place an industrial actuator in a safe condition if control messages are lost, not to achieve the specific requirement to stop a malfunctioning sensor overwhelming its broker with telemetry.

C:

Name and egress policy constrain cloud communication beyond the manufacturer's approved endpoints; it addresses the different need to prevent internet-connected cameras contacting unapproved remote domains, leaving the requested ability to stop a malfunctioning sensor overwhelming its broker with telemetry unresolved.

D:

Controlled malformed-input testing reveals robustness defects before exposed deployment; the technique works for situations involving find failures in an IoT parser receiving malformed telemetry frames, rather than this need to stop a malfunctioning sensor overwhelming its broker with telemetry.

Question 429

To keep embedded web consoles inaccessible from ordinary office clients, to stop a malfunctioning sensor overwhelming its broker with telemetry, and to prevent internet-connected cameras contacting unapproved remote domains, which THREE measures should the team select? Choose THREE.

  1. Device rate limiting
  2. Safety fail-safe design
  3. IoT intrusion detection
  4. DNS destination allowlist
  5. Remote management jump path
  6. Protocol fuzz testing

Explanation

Correct Answers

A:

Per-device quotas protect shared ingestion capacity without blocking every well-behaved peer; this is the measure that can stop a malfunctioning sensor overwhelming its broker with telemetry as one of the separately stated outcomes.

D:

Name and egress policy constrain cloud communication beyond the manufacturer's approved endpoints; this is the measure that can prevent internet-connected cameras contacting unapproved remote domains as one of the separately stated outcomes.

E:

A controlled management gateway provides auditable access to restricted device administration interfaces; this is the measure that can keep embedded web consoles inaccessible from ordinary office clients as one of the separately stated outcomes.

Incorrect Answers

B:

Fail-safe operation considers physical consequences rather than simply restarting network services; its operational purpose is to place an industrial actuator in a safe condition if control messages are lost, not to achieve the specific requirement to keep embedded web consoles inaccessible from ordinary office clients, to stop a malfunctioning sensor overwhelming its broker with telemetry, and to prevent internet-connected cameras contacting unapproved remote domains.

C:

Protocol-aware or flow-based detection models behaviors uncommon for a device role; applying it would serve alert on lateral scanning originating from low-power appliances without directly satisfying the goal to keep embedded web consoles inaccessible from ordinary office clients, to stop a malfunctioning sensor overwhelming its broker with telemetry, and to prevent internet-connected cameras contacting unapproved remote domains.

F:

Controlled malformed-input testing reveals robustness defects before exposed deployment; its mechanism supports find failures in an IoT parser receiving malformed telemetry frames, while the requested control must be able to keep embedded web consoles inaccessible from ordinary office clients, to stop a malfunctioning sensor overwhelming its broker with telemetry, and to prevent internet-connected cameras contacting unapproved remote domains.

Question 430

To record why an unpatchable controller remains in service with isolation, which method is designed for the task?

  1. IEC 62443 zone review
  2. Firmware staged rollout
  3. Supplier vulnerability disclosure
  4. IoT backup configuration
  5. IoT risk exception

Explanation

Correct Answer

E:

Formal acceptance documents safety constraints and compensating safeguards pending replacement; the requested outcome is precisely to record why an unpatchable controller remains in service with isolation.

Incorrect Answers

A:

Zones and conduits express trust boundaries suited to industrial automation environments; that is useful when the task is to separate industrial assets according to security levels and permitted conduits, not the stated requirement to record why an unpatchable controller remains in service with isolation.

B:

Canary deployment and rollback planning lower fleet-wide outage risk from a bad update; a team would select it to detect compatibility failures before upgrading all remote field devices, which does not provide the particular result to record why an unpatchable controller remains in service with isolation.

C:

Coordinated disclosure and vendor advisory monitoring improve remediation speed; its operational purpose is to give operators a route to learn about flaws affecting a device model, not to achieve the specific requirement to record why an unpatchable controller remains in service with isolation.

D:

Protected backups capture critical state while keeping secret material under appropriate access control; applying it would serve restore gateway addressing and keys after a hardware replacement without directly satisfying the goal to record why an unpatchable controller remains in service with isolation.

Certified Network Defender (312-38) Practice Tests