ECCouncil 312-38 (Certified Network Defender) Practice Test 19

Question 180

To identify previously characterized exploit payload patterns in traffic, what technique should the team use?

  1. Signature-based detection
  2. False-negative investigation
  3. Network IDS sensor
  4. Inline IPS
  5. Anomaly-based detection

Explanation

Correct Answer

A:

Rules detect known artifacts reliably within their visibility scope but may miss novel variants; this mechanism directly supports the requirement to identify previously characterized exploit payload patterns in traffic.

Incorrect Answers

B:

Reviewing sensor placement, encrypted visibility and signatures uncovers missed coverage; a team would select it to find why a real attack escaped the configured IDS policy, which does not provide the particular result to identify previously characterized exploit payload patterns in traffic.

C:

A passive sensor observes copied or tapped traffic but does not inherently drop it; its operational purpose is to alert on malicious packets crossing a monitored network link, not to achieve the specific requirement to identify previously characterized exploit payload patterns in traffic.

D:

An inline engine sits in the forwarding path and can actively discard or reset matched flows; applying it would serve block a network signature match before suspicious traffic reaches its destination without directly satisfying the goal to identify previously characterized exploit payload patterns in traffic.

E:

Behavior models expose unfamiliar deviations but need tuning to minimize legitimate-change noise; it addresses the different need to alert when traffic diverges substantially from an established normal baseline, leaving the requested ability to identify previously characterized exploit payload patterns in traffic unresolved.

Question 181

To alert when traffic diverges substantially from an established normal baseline, which protective or investigative measure applies?

  1. Anomaly-based detection
  2. False-negative investigation
  3. False-positive triage
  4. Signature-based detection

Explanation

Correct Answer

A:

Behavior models expose unfamiliar deviations but need tuning to minimize legitimate-change noise; it supplies the specific control needed to alert when traffic diverges substantially from an established normal baseline.

Incorrect Answers

B:

Reviewing sensor placement, encrypted visibility and signatures uncovers missed coverage; that is useful when the task is to find why a real attack escaped the configured IDS policy, not the stated requirement to alert when traffic diverges substantially from an established normal baseline.

C:

Contextual tuning distinguishes sanctioned testing from malicious-looking but expected activity; a team would select it to reduce alerts on legitimate scheduled vulnerability scanning, which does not provide the particular result to alert when traffic diverges substantially from an established normal baseline.

D:

Rules detect known artifacts reliably within their visibility scope but may miss novel variants; its operational purpose is to identify previously characterized exploit payload patterns in traffic, not to achieve the specific requirement to alert when traffic diverges substantially from an established normal baseline.

Question 182

To reduce alerts on legitimate scheduled vulnerability scanning, what is the most direct option?

  1. Anomaly-based detection
  2. Sensor packet-loss analysis
  3. False-negative investigation
  4. False-positive triage

Explanation

Correct Answer

D:

Contextual tuning distinguishes sanctioned testing from malicious-looking but expected activity; that is why it addresses the operational task to reduce alerts on legitimate scheduled vulnerability scanning.

Incorrect Answers

A:

Behavior models expose unfamiliar deviations but need tuning to minimize legitimate-change noise; although relevant to alert when traffic diverges substantially from an established normal baseline, it does not by itself achieve the required task to reduce alerts on legitimate scheduled vulnerability scanning.

B:

Dropped capture packets create blind spots even if detection logic itself is correct. This can help to serve a separate, narrower security objective, but it does not provide the particular mechanism required to reduce alerts on legitimate scheduled vulnerability scanning.

C:

Reviewing sensor placement, encrypted visibility and signatures uncovers missed coverage; that is useful when the task is to find why a real attack escaped the configured IDS policy, not the stated requirement to reduce alerts on legitimate scheduled vulnerability scanning.

Question 183

To find why a real attack escaped the configured IDS policy, what should defenders select?

  1. Detection rule tuning
  2. Anomaly-based detection
  3. False-negative investigation
  4. False-positive triage

Explanation

Correct Answer

C:

Reviewing sensor placement, encrypted visibility and signatures uncovers missed coverage; its relevant protective or investigative effect is to find why a real attack escaped the configured IDS policy.

Incorrect Answers

A:

Contextual rule conditions improve precision compared with indiscriminate enabling of every pattern; the outcome it supports is to narrow an IDS signature to protected services and relevant payloads, whereas this scenario asks defenders to find why a real attack escaped the configured IDS policy.

B:

Behavior models expose unfamiliar deviations but need tuning to minimize legitimate-change noise; although relevant to alert when traffic diverges substantially from an established normal baseline, it does not by itself achieve the required task to find why a real attack escaped the configured IDS policy.

D:

Contextual tuning distinguishes sanctioned testing from malicious-looking but expected activity; that is useful when the task is to reduce alerts on legitimate scheduled vulnerability scanning, not the stated requirement to find why a real attack escaped the configured IDS policy.

Question 184

To narrow an IDS signature to protected services and relevant payloads, which mechanism best fits?

  1. Detection rule tuning
  2. False-negative investigation
  3. False-positive triage
  4. SPAN port monitoring

Explanation

Correct Answer

A:

Contextual rule conditions improve precision compared with indiscriminate enabling of every pattern; the requested outcome is precisely to narrow an IDS signature to protected services and relevant payloads.

Incorrect Answers

B:

Reviewing sensor placement, encrypted visibility and signatures uncovers missed coverage; the outcome it supports is to find why a real attack escaped the configured IDS policy, whereas this scenario asks defenders to narrow an IDS signature to protected services and relevant payloads.

C:

Contextual tuning distinguishes sanctioned testing from malicious-looking but expected activity; although relevant to reduce alerts on legitimate scheduled vulnerability scanning, it does not by itself achieve the required task to narrow an IDS signature to protected services and relevant payloads.

D:

Port mirroring provides visibility without inserting a prevention device into the forwarding path; it could help someone trying to send copies of switch traffic to an out-of-band sensor, but the problem is instead to narrow an IDS signature to protected services and relevant payloads.

Question 185

To explain why high-volume links produce incomplete IDS evidence and to maintain traffic availability when a critical inline inspection device fails, which TWO measures should the defender select? Choose TWO.

  1. Sensor packet-loss analysis
  2. Detection rule tuning
  3. Anomaly-based detection
  4. SPAN port monitoring
  5. IPS fail-open decision

Explanation

Correct Answers

A:

Dropped capture packets create blind spots even if detection logic itself is correct; it satisfies the distinct requirement to explain why high-volume links produce incomplete IDS evidence within the multi-control task.

E:

Fail-open bypass preserves connectivity at the cost of temporary inspection loss; it satisfies the distinct requirement to maintain traffic availability when a critical inline inspection device fails within the multi-control task.

Incorrect Answers

B:

Contextual rule conditions improve precision compared with indiscriminate enabling of every pattern; its mechanism supports narrow an IDS signature to protected services and relevant payloads, while the requested control must be able to explain why high-volume links produce incomplete IDS evidence and to maintain traffic availability when a critical inline inspection device fails.

C:

Behavior models expose unfamiliar deviations but need tuning to minimize legitimate-change noise; the outcome it supports is to alert when traffic diverges substantially from an established normal baseline, whereas this scenario asks defenders to explain why high-volume links produce incomplete IDS evidence and to maintain traffic availability when a critical inline inspection device fails.

D:

Port mirroring provides visibility without inserting a prevention device into the forwarding path; although relevant to send copies of switch traffic to an out-of-band sensor, it does not by itself achieve the required task to explain why high-volume links produce incomplete IDS evidence and to maintain traffic availability when a critical inline inspection device fails.

Question 186

To maintain traffic availability when a critical inline inspection device fails, what control should be selected?

  1. SPAN port monitoring
  2. IPS fail-open decision
  3. Sensor packet-loss analysis
  4. False-negative investigation

Explanation

Correct Answer

B:

Fail-open bypass preserves connectivity at the cost of temporary inspection loss; this mechanism directly supports the requirement to maintain traffic availability when a critical inline inspection device fails.

Incorrect Answers

A:

Port mirroring provides visibility without inserting a prevention device into the forwarding path; it addresses the different need to send copies of switch traffic to an out-of-band sensor, leaving the requested ability to maintain traffic availability when a critical inline inspection device fails unresolved.

C:

Dropped capture packets create blind spots even if detection logic itself is correct; its mechanism supports explain why high-volume links produce incomplete IDS evidence, while the requested control must be able to maintain traffic availability when a critical inline inspection device fails.

D:

Reviewing sensor placement, encrypted visibility and signatures uncovers missed coverage; the outcome it supports is to find why a real attack escaped the configured IDS policy, whereas this scenario asks defenders to maintain traffic availability when a critical inline inspection device fails.

Question 187

To send copies of switch traffic to an out-of-band sensor, what control should be selected?

  1. SPAN port monitoring
  2. False-positive triage
  3. Detection rule tuning
  4. IPS fail-open decision

Explanation

Correct Answer

A:

Port mirroring provides visibility without inserting a prevention device into the forwarding path; it supplies the specific control needed to send copies of switch traffic to an out-of-band sensor.

Incorrect Answers

B:

Contextual tuning distinguishes sanctioned testing from malicious-looking but expected activity; it addresses the different need to reduce alerts on legitimate scheduled vulnerability scanning, leaving the requested ability to send copies of switch traffic to an out-of-band sensor unresolved.

C:

Contextual rule conditions improve precision compared with indiscriminate enabling of every pattern; the technique works for situations involving narrow an IDS signature to protected services and relevant payloads, rather than this need to send copies of switch traffic to an out-of-band sensor.

D:

Fail-open bypass preserves connectivity at the cost of temporary inspection loss; its mechanism supports maintain traffic availability when a critical inline inspection device fails, while the requested control must be able to send copies of switch traffic to an out-of-band sensor.

Question 188

To protect a router CPU from floods aimed at routing and management functions, which security control is most appropriate?

  1. Switch port security
  2. Control-plane policing
  3. AAA command accounting
  4. Management ACL

Explanation

Correct Answer

B:

CoPP rate-limits packets destined to the device control plane rather than normal transit data; that is why it addresses the operational task to protect a router CPU from floods aimed at routing and management functions.

Incorrect Answers

A:

Port security detects unexpected attached devices under configured violation and aging behavior; its operational purpose is to limit acceptable learned MAC addresses on a designated access port, not to achieve the specific requirement to protect a router CPU from floods aimed at routing and management functions.

C:

Centralized device accounting associates privileged actions with authenticated operator identities; it addresses the different need to record which administrator issued sensitive configuration commands, leaving the requested ability to protect a router CPU from floods aimed at routing and management functions unresolved.

D:

Source-based control narrows the management surface before authentication is attempted; the technique works for situations involving allow administrative login only from designated operations hosts, rather than this need to protect a router CPU from floods aimed at routing and management functions.

Question 189

To allow administrative login only from designated operations hosts, what would a perimeter engineer implement or use?

  1. Management ACL
  2. AAA command accounting
  3. Control-plane policing
  4. Unused service removal

Explanation

Correct Answer

A:

Source-based control narrows the management surface before authentication is attempted; its relevant protective or investigative effect is to allow administrative login only from designated operations hosts.

Incorrect Answers

B:

Centralized device accounting associates privileged actions with authenticated operator identities; its operational purpose is to record which administrator issued sensitive configuration commands, not to achieve the specific requirement to allow administrative login only from designated operations hosts.

C:

CoPP rate-limits packets destined to the device control plane rather than normal transit data; applying it would serve protect a router CPU from floods aimed at routing and management functions without directly satisfying the goal to allow administrative login only from designated operations hosts.

D:

Reducing active management and discovery services cuts the number of reachable software components. This can help to eliminate exposed device daemons not required for operations, but it does not provide the particular mechanism required to allow administrative login only from designated operations hosts.

Question 190

To remove plaintext remote management from a network appliance, which practice addresses that objective?

  1. Switch port security
  2. Control-plane policing
  3. SSH-only administration
  4. Management ACL
  5. Unused port shutdown
  6. AAA command accounting

Explanation

Correct Answer

C:

SSH encrypts credentials and CLI sessions, unlike Telnet access over a monitored segment; the requested outcome is precisely to remove plaintext remote management from a network appliance.

Incorrect Answers

A:

Port security detects unexpected attached devices under configured violation and aging behavior; that is useful when the task is to limit acceptable learned MAC addresses on a designated access port, not the stated requirement to remove plaintext remote management from a network appliance.

B:

CoPP rate-limits packets destined to the device control plane rather than normal transit data; a team would select it to protect a router CPU from floods aimed at routing and management functions, which does not provide the particular result to remove plaintext remote management from a network appliance.

D:

Source-based control narrows the management surface before authentication is attempted; applying it would serve allow administrative login only from designated operations hosts without directly satisfying the goal to remove plaintext remote management from a network appliance.

E:

Disabling unused access interfaces removes a physical path until an authorized change enables it; it addresses the different need to stop an attacker using vacant office switch sockets for network entry, leaving the requested ability to remove plaintext remote management from a network appliance unresolved.

F:

Centralized device accounting associates privileged actions with authenticated operator identities; the technique works for situations involving record which administrator issued sensitive configuration commands, rather than this need to remove plaintext remote management from a network appliance.

Certified Network Defender (312-38) Practice Tests