Question 60

A project begins with an automatic subnet set but needs controlled subnet locations and ranges going forward. What should be configured?

  1. Convert the auto mode network to custom mode before manually managing additional subnets
  2. Configure Shared VPC host and service project relationships
  3. Create a custom mode VPC network and its desired regional subnets
  4. Create a folder under the organization and place the division's projects inside it
  5. Attach the VM NICs to a subnet in that region

Explanation

Correct Answer

A:

Auto mode creates predefined regional subnets; conversion to custom mode stops that automatic model. Conversion does not undo the existing subnets automatically.

Incorrect Answers

B:

Using this action would share a centrally managed network across projects, not stop automatic subnet provisioning. Its function is different from the specific change described in the scenario.

C:

This setting would define subnets explicitly in a custom VPC. That behavior does not establish the requested ability to stop automatic subnet provisioning; it addresses an adjacent concern instead.

D:

It can group child projects under a common policy boundary; however, it does not provide the specific operation to stop automatic subnet provisioning. The two controls serve different purposes.

E:

The tool can use a regional subnet across zones, but it cannot be substituted for the capability needed to stop automatic subnet provisioning. Its operational effect is not equivalent.

Question 61

A development VM has no required private route to a second VM in the same VPC, and administrators are checking network membership. Which approach should be selected?

  1. Create a suitable Cloud DNS private zone and authorize the VPC
  2. Verify both interfaces use the intended VPC and valid reachable subnet ranges
  3. Allocate nonoverlapping primary IPv4 CIDR ranges when creating the subnets
  4. Plan Cloud NAT for internet-bound egress from the private subnet

Explanation

Correct Answer

B:

VPC membership determines the base private network context. Firewall and routing must also permit communication, but putting VMs on unrelated networks creates a different connectivity problem.

Incorrect Answers

A:

While this can serve private DNS records to an authorized VPC, the present task requires an action to place two VM NICs in the intended private network. This operation does not supply the behavior described in the requirements.

C:

Its purpose is to allocate nonoverlapping private subnet ranges. That distinction matters: the scenario calls for an action to place two VM NICs in the intended private network, not this separate configuration task.

D:

This approach can provide outbound NAT without external VM addresses. The requirement is to place two VM NICs in the intended private network, so it controls a different part of the workflow and leaves that result unaddressed.

Question 62

A team is building IPv4 subnets and wants to prevent overlap across planned regional ranges. Which method addresses the task?

  1. Attach the VM NICs to a subnet in that region
  2. Verify both interfaces use the intended VPC and valid reachable subnet ranges
  3. Plan Cloud NAT for internet-bound egress from the private subnet
  4. Create a suitable Cloud DNS private zone and authorize the VPC
  5. Allocate nonoverlapping primary IPv4 CIDR ranges when creating the subnets

Explanation

Correct Answer

E:

Subnet primary ranges must be unique within a VPC. A deliberate address plan avoids conflicts with additional subnets and connected networks.

Incorrect Answers

A:

For the stated need to prevent address collisions inside a VPC, this would instead use a regional subnet across zones; it supports the separate task to connect VMs in multiple zones to one regional subnet, not the required configuration.

B:

This mechanism is intended to verify network and subnet membership. It does not implement the required action to prevent address collisions inside a VPC, even though both are relevant to the same general service.

C:

Select this when the goal is to provide outbound NAT without external VM addresses. Here the decisive requirement is to prevent address collisions inside a VPC, and that outcome is not achieved by this action.

D:

It can serve private DNS records to an authorized VPC; however, it does not provide the specific operation to prevent address collisions inside a VPC. The two controls serve different purposes.

Question 63

A project needs a private VM to reach package repositories over the internet without giving that VM an external IP. What is the best next step?

  1. Create a suitable Cloud DNS private zone and authorize the VPC
  2. Plan Cloud NAT for internet-bound egress from the private subnet
  3. Allocate nonoverlapping primary IPv4 CIDR ranges when creating the subnets
  4. Verify both interfaces use the intended VPC and valid reachable subnet ranges
  5. Convert the auto mode network to custom mode before manually managing additional subnets

Explanation

Correct Answer

B:

Cloud NAT provides outbound address translation for eligible private resources. It is not an inbound port-forwarding service for arbitrary internet clients.

Incorrect Answers

A:

This setting would serve private DNS records to an authorized VPC. That behavior does not establish the requested ability to enable internet egress for private-only instances; it addresses an adjacent concern instead.

C:

This approach can allocate nonoverlapping private subnet ranges. The requirement is to enable internet egress for private-only instances, so it controls a different part of the workflow and leaves that result unaddressed.

D:

Using this action would verify network and subnet membership, not enable internet egress for private-only instances. Its function is different from the specific change described in the scenario.

E:

In a workflow for initial vpc planning, it can take explicit control of an auto-mode VPC; This question instead asks how to enable internet egress for private-only instances; substituting the former action would leave that distinct technical requirement unmet.

Question 64

An engineer wants internal name resolution for private service hostnames in its VPC. Which configuration best meets the requirement?

  1. Configure Shared VPC host and service project relationships
  2. Verify both interfaces use the intended VPC and valid reachable subnet ranges
  3. Plan Cloud NAT for internet-bound egress from the private subnet
  4. Create a suitable Cloud DNS private zone and authorize the VPC
  5. Allocate nonoverlapping primary IPv4 CIDR ranges when creating the subnets

Explanation

Correct Answer

D:

Private zones expose DNS records to authorized networks. They separate internal resolution from public DNS publication.

Incorrect Answers

A:

The choice is aimed at a different purpose: to centralize network administration for service projects; Even if it can share a centrally managed network across projects, that would not accomplish the stated requirement to provide internal hostname resolution.

B:

Administrators use it to verify network and subnet membership, rather than to provide internal hostname resolution. Applying it would change the wrong component of this deployment.

C:

This mechanism is intended to provide outbound NAT without external VM addresses. It does not implement the required action to provide internal hostname resolution, even though both are relevant to the same general service.

E:

The result of this choice would be to allocate nonoverlapping private subnet ranges. The requested outcome, to provide internal hostname resolution, is handled at a different layer or through another operation.

Question 65

A new project must show infrastructure performance charts without adding its own custom dashboard backend. Which choice provides the required behavior?

  1. Configure the appropriate Google Cloud Observability integrations
  2. Use Cloud Monitoring metrics and dashboards for supported resources
  3. Use Cloud Logging log storage and Logs Explorer
  4. Create a Cloud Monitoring metric-based alerting policy

Explanation

Correct Answer

B:

Google Cloud Monitoring collects platform service metrics and presents them in managed charts. Built-in visibility differs from a separate self-hosted telemetry stack.

Incorrect Answers

A:

Using this action would integrate multiple observability signal types, not bootstrap standard performance dashboards. Its function is different from the specific change described in the scenario.

C:

This setting would store and query platform and application logs. That behavior does not establish the requested ability to bootstrap standard performance dashboards; it addresses an adjacent concern instead.

D:

This choice is useful to alert on metric conditions. The stated task is to bootstrap standard performance dashboards, which requires a different mechanism or permission scope.

Question 66

An administrator needs centralized access to application and platform log entries from supported services. Which approach should be selected?

  1. Use Cloud Monitoring metrics and dashboards for supported resources
  2. Use Cloud Monitoring dashboards or service telemetry appropriate to the workload
  3. Configure the appropriate Google Cloud Observability integrations
  4. Use Cloud Logging log storage and Logs Explorer
  5. Create a Cloud Monitoring metric-based alerting policy

Explanation

Correct Answer

D:

Cloud Logging collects supported log entries and exposes filtering and analysis tools. It stores log records rather than sampled performance time series.

Incorrect Answers

A:

Its purpose is to visualize resource metrics through a managed service. That distinction matters: the scenario calls for an action to enable centralized log inspection, not this separate configuration task.

B:

In a workflow for monitoring scope and collection setup, it can view runtime service telemetry; This question instead asks how to enable centralized log inspection; substituting the former action would leave that distinct technical requirement unmet.

C:

Administrators use it to integrate multiple observability signal types, rather than to enable centralized log inspection. Applying it would change the wrong component of this deployment.

E:

The result of this choice would be to alert on metric conditions. The requested outcome, to enable centralized log inspection, is handled at a different layer or through another operation.

Question 67

An engineering team is onboarding a supported service into Google Cloud Observability and needs a coordinated setup for its logs and metrics, rather than only viewing a dashboard or creating an alert. Which action best fits?

  1. Create a Cloud Monitoring metric-based alerting policy
  2. Configure the appropriate Google Cloud Observability integrations
  3. Write a custom metric through the supported Cloud Monitoring integration
  4. Use Cloud Logging log storage and Logs Explorer
  5. Use Cloud Monitoring metrics and dashboards for supported resources

Explanation

Correct Answer

B:

The observability suite includes metrics, logs, traces, and related diagnostic surfaces. Different data types serve complementary investigation needs.

Incorrect Answers

A:

It can alert on metric conditions; however, it does not provide the specific operation to initialize operational visibility across metrics and logs. The two controls serve different purposes.

C:

The choice is aimed at a different purpose: to observe a custom business measurement; Even if it can ingest application-defined metrics, that would not accomplish the stated requirement to initialize operational visibility across metrics and logs.

D:

This choice is useful to store and query platform and application logs. The stated task is to initialize operational visibility across metrics and logs, which requires a different mechanism or permission scope.

E:

The tool can visualize resource metrics through a managed service, but it cannot be substituted for the capability needed to initialize operational visibility across metrics and logs. Its operational effect is not equivalent.

Question 68

A project owner wants an early alert when a VM's monitored CPU utilization stays high. What is the best next step?

  1. Create a Cloud Monitoring metric-based alerting policy
  2. Plan Cloud Logging sinks and destination access before relying on exports
  3. Use Cloud Monitoring metrics and dashboards for supported resources
  4. Configure the appropriate Google Cloud Observability integrations
  5. Use Cloud Logging log storage and Logs Explorer

Explanation

Correct Answer

A:

Monitoring alerting policies evaluate time-series conditions and notify configured channels. An asset inventory query cannot substitute for a threshold-based operational alert.

Incorrect Answers

B:

This alternative addresses initial project observability governance by allowing a team to configure centralized log-routing destinations; The incident, however, requires the different action to receive notifications about sustained resource utilization, so its central configuration remains unchanged.

C:

This approach can visualize resource metrics through a managed service. The requirement is to receive notifications about sustained resource utilization, so it controls a different part of the workflow and leaves that result unaddressed.

D:

This setting would integrate multiple observability signal types. That behavior does not establish the requested ability to receive notifications about sustained resource utilization; it addresses an adjacent concern instead.

E:

Its purpose is to store and query platform and application logs. That distinction matters: the scenario calls for an action to receive notifications about sustained resource utilization, not this separate configuration task.

Question 69

An application reports a custom business metric not emitted by the platform automatically. What should the administrator do?

  1. Install and configure the Ops Agent on supported VM guests
  2. Create a folder under the organization and place the division's projects inside it
  3. Write a custom metric through the supported Cloud Monitoring integration
  4. Configure an appropriate metrics scope for the scoping project
  5. Use Cloud Monitoring dashboards or service telemetry appropriate to the workload

Explanation

Correct Answer

C:

Custom metrics allow applications to report their own numeric signals. Those samples can then be charted and used in alert policies.

Incorrect Answers

A:

This mechanism is intended to collect in-guest VM telemetry. It does not implement the required action to observe a custom business measurement, even though both are relevant to the same general service.

B:

Select this when the goal is to group child projects under a common policy boundary. Here the decisive requirement is to observe a custom business measurement, and that outcome is not achieved by this action.

D:

The tool can include multiple projects in one metric-viewing scope, but it cannot be substituted for the capability needed to observe a custom business measurement. Its operational effect is not equivalent.

E:

The result of this choice would be to view runtime service telemetry. The requested outcome, to observe a custom business measurement, is handled at a different layer or through another operation.

Question 70

The operations team must watch resources across multiple projects in a single Monitoring view. Which choice provides the required behavior?

  1. Write a custom metric through the supported Cloud Monitoring integration
  2. Install and configure the Ops Agent on supported VM guests
  3. Configure an appropriate metrics scope for the scoping project
  4. Use Cloud Monitoring dashboards or service telemetry appropriate to the workload

Explanation

Correct Answer

C:

Metrics scopes determine which projects' metrics appear in a Monitoring workspace context. They do not merge project IAM or billing accounts.

Incorrect Answers

A:

Using this action would ingest application-defined metrics, not build cross-project operational charts. Its function is different from the specific change described in the scenario.

B:

This choice is useful to collect in-guest VM telemetry. The stated task is to build cross-project operational charts, which requires a different mechanism or permission scope.

D:

This approach can view runtime service telemetry. The requirement is to build cross-project operational charts, so it controls a different part of the workflow and leaves that result unaddressed.

Associate Cloud Engineer Practice Tests