Question 430
A managed instance group contains VMs with per-instance Persistent Disks holding checkpoint data. Members must survive automated repair and rolling updates without replacing their preserved disks with blank volumes. Which MIG configuration supports this?
- Rely on ordinary scheduled autoscaling to keep the disks attached after an instance is deleted
- Enable only a load balancer health check without specifying any preserved state
- Use Cloud Storage object lifecycle rules as the stateful disk policy for the VM group
- Configure a stateful MIG policy or per-instance preserved-state configuration for the required disks
Explanation
Correct Answer
D:Stateful MIGs retain configured instance-specific disk state through supported recreation, autohealing, and updates. The group must preserve the relevant disks rather than treating them as stateless template resources.
Incorrect Answers
A:A scaling schedule controls group capacity; it does not declare per-instance disks as preserved state. Removing or replacing instances can affect state without the proper stateful configuration.
B:A health check can detect failures but does not tell MIG automation which data disks must be retained across recreation. State preservation needs explicit settings.
C:Bucket object lifecycle rules apply to Cloud Storage objects, not the persistence behavior of Compute Engine disks during a MIG instance recreation.
Question 431
A VM needs a new shape because observed memory usage exceeds its current machine allocation. Which solution should be used?
- Replicate the service across zones behind an appropriate load-balancing design
- Configure scheduled MIG autoscaling for the expected interval
- Enable MIG autohealing with an appropriate health check
- Change the VM machine type through a supported stop and update workflow
Explanation
Correct Answer
D:Resizing a VM changes its provisioned CPU and memory class. It often requires stopping the instance and verifying machine compatibility.
Incorrect Answers
A:This mechanism is intended to deploy a multi-zone application tier. It does not implement the required action to increase provisioned guest memory, even though both are relevant to the same general service.
B:The result of this choice would be to schedule predictable VM fleet capacity. The requested outcome, to increase provisioned guest memory, is handled at a different layer or through another operation.
C:Administrators use it to recover failed VM group members, rather than to increase provisioned guest memory. Applying it would change the wrong component of this deployment.
Question 432
A production service uses only one zonal VM and needs resilience to a zone failure. How should the team proceed?
- Configure scheduled MIG autoscaling for the expected interval
- Replicate the service across zones behind an appropriate load-balancing design
- Validate the framework and accelerator compatibility before provisioning
- Enable MIG autohealing with an appropriate health check
- Change the VM machine type through a supported stop and update workflow
Explanation
Correct Answer
B:One zonal VM is a single failure-domain dependency. Distributing independent instances across zones reduces that exposure.
Incorrect Answers
A:The tool can schedule predictable VM fleet capacity, but it cannot be substituted for the capability needed to eliminate single-zone VM dependency. Its operational effect is not equivalent.
C:This proposal can match accelerators with ML framework support, but the failure or goal described here calls for a way to eliminate single-zone VM dependency; It changes the wrong control or scope for the requested outcome.
D:This choice is useful to recover failed VM group members. The stated task is to eliminate single-zone VM dependency, which requires a different mechanism or permission scope.
E:Using this action would resize a VM machine type, not eliminate single-zone VM dependency. Its function is different from the specific change described in the scenario.
Question 433
An application runtime must read private objects from one Cloud Storage bucket without listing other buckets. Which configuration best meets the requirement?
- Grant an appropriate Storage Object Creator role on the bucket
- Grant a suitable Storage Object Viewer role on the specific bucket
- Enable uniform bucket-level access for the selected bucket
- Enforce Cloud Storage public access prevention for the required scope
Explanation
Correct Answer
B:Bucket-level IAM can authorize object reads without a broad project-wide grant. The runtime's actual service identity must be the bound principal.
Incorrect Answers
A:Its purpose is to permit new object creation only. That distinction matters: the scenario calls for an action to authorize narrow private object reads, not this separate configuration task.
C:Administrators use it to enforce IAM-only object access, rather than to authorize narrow private object reads. Applying it would change the wrong component of this deployment.
D:While this can prevent public Cloud Storage exposure, the present task requires an action to authorize narrow private object reads. This operation does not supply the behavior described in the requirements.
Question 434
A backend upload process must add new objects to a bucket without being allowed to delete existing ones. What should be configured?
- Place an appropriate Cloud Storage object hold
- Grant a suitable Storage Object Viewer role on the specific bucket
- Enforce Cloud Storage public access prevention for the required scope
- Grant an appropriate Storage Object Creator role on the bucket
- Enable uniform bucket-level access for the selected bucket
Explanation
Correct Answer
D:Object Creator supports creation without broad overwrite and delete powers. The role should be assigned to the uploading identity at the narrowest practical scope.
Incorrect Answers
A:Choosing this would hold an object against deletion, an appropriate action for managing objects and versions operations; It cannot take the place of the separate step needed to let a producer upload without destructive access in this specific situation.
B:It can grant read access to objects in one bucket; however, it does not provide the specific operation to let a producer upload without destructive access. The two controls serve different purposes.
C:The tool can prevent public Cloud Storage exposure, but it cannot be substituted for the capability needed to let a producer upload without destructive access. Its operational effect is not equivalent.
E:This mechanism is intended to enforce IAM-only object access. It does not implement the required action to let a producer upload without destructive access, even though both are relevant to the same general service.
Question 435
An enterprise wants consistent bucket IAM instead of per-object ACL management. Which action is most appropriate?
- Evaluate Cloud Storage Autoclass for the eligible bucket
- Enable uniform bucket-level access for the selected bucket
- Grant a suitable Storage Object Viewer role on the specific bucket
- Grant an appropriate Storage Object Creator role on the bucket
- Enforce Cloud Storage public access prevention for the required scope
Explanation
Correct Answer
B:Uniform bucket-level access disables object ACLs and uses IAM for Cloud Storage access management. Existing ACL-based workflows need assessment before conversion.
Incorrect Answers
A:This proposal can automatically manage object storage class, but the failure or goal described here calls for a way to remove per-object ACL dependency; It changes the wrong control or scope for the requested outcome.
C:This approach can grant read access to objects in one bucket. The requirement is to remove per-object ACL dependency, so it controls a different part of the workflow and leaves that result unaddressed.
D:Using this action would permit new object creation only, not remove per-object ACL dependency. Its function is different from the specific change described in the scenario.
E:This setting would prevent public Cloud Storage exposure. That behavior does not establish the requested ability to remove per-object ACL dependency; it addresses an adjacent concern instead.
Question 436
A security owner needs to stop users from making a bucket's data publicly accessible through common grants. Which solution should be used?
- Enable and review appropriate Cloud Audit Logs for Cloud Storage access
- Grant a suitable Storage Object Viewer role on the specific bucket
- Enable uniform bucket-level access for the selected bucket
- Grant an appropriate Storage Object Creator role on the bucket
- Enforce Cloud Storage public access prevention for the required scope
Explanation
Correct Answer
E:Public access prevention blocks public access through supported IAM and ACL mechanisms. It is stronger than merely omitting a current allUsers binding.
Incorrect Answers
A:An operator would use this action to capture object access audit records, chiefly when trying to audit reads and writes on storage; The current requirement is to guard against future public object grants, which remains unresolved by that operation.
B:Select this when the goal is to grant read access to objects in one bucket. Here the decisive requirement is to guard against future public object grants, and that outcome is not achieved by this action.
C:The result of this choice would be to enforce IAM-only object access. The requested outcome, to guard against future public object grants, is handled at a different layer or through another operation.
D:This mechanism is intended to permit new object creation only. It does not implement the required action to guard against future public object grants, even though both are relevant to the same general service.
Question 437
A critical object was overwritten and the team wants its prior generation back. What is the best next step?
- Recover the object from an existing noncurrent generation if Object Versioning preserved it
- Configure an appropriate retention policy or object retention setting
- Place an appropriate Cloud Storage object hold
- Generate a signed URL for the permitted operation and expiration
Explanation
Correct Answer
A:Cloud Storage versions retain earlier object generations when configured. Recovery depends on the prior generation still being available under retention and lifecycle settings.
Incorrect Answers
B:It can enforce object retention for compliance; however, it does not provide the specific operation to recover overwritten bucket content. The two controls serve different purposes.
C:This choice is useful to hold an object against deletion. The stated task is to recover overwritten bucket content, which requires a different mechanism or permission scope.
D:Using this action would delegate a temporary object download, not recover overwritten bucket content. Its function is different from the specific change described in the scenario.
Question 438
A single object must be downloadable by a partner for one hour without granting bucket IAM. Which configuration best meets the requirement?
- Generate a signed URL for the permitted operation and expiration
- Configure an appropriate retention policy or object retention setting
- Recover the object from an existing noncurrent generation if Object Versioning preserved it
- Place an appropriate Cloud Storage object hold
- Grant a suitable Storage Object Viewer role on the specific bucket
Explanation
Correct Answer
A:Signed URLs authorize time-bound object requests using a valid signing identity. They avoid a persistent IAM grant to the partner.
Incorrect Answers
B:The result of this choice would be to enforce object retention for compliance. The requested outcome, to share one private file for limited time, is handled at a different layer or through another operation.
C:This mechanism is intended to restore a previous object generation. It does not implement the required action to share one private file for limited time, even though both are relevant to the same general service.
D:Administrators use it to hold an object against deletion, rather than to share one private file for limited time. Applying it would change the wrong component of this deployment.
E:While this can grant read access to objects in one bucket, the present task requires an action to share one private file for limited time. This operation does not supply the behavior described in the requirements.
Question 439
A bucket contains records that must not be altered or deleted before a required date. What should be configured?
- Configure an appropriate retention policy or object retention setting
- Generate a signed URL for the permitted operation and expiration
- Use lifecycle conditions appropriate to noncurrent object versions
- Recover the object from an existing noncurrent generation if Object Versioning preserved it
- Place an appropriate Cloud Storage object hold
Explanation
Correct Answer
A:Retention controls can prevent object deletion or modification before the specified requirement is met. Locking a retention policy has serious irreversible governance implications.
Incorrect Answers
B:Select this when the goal is to delegate a temporary object download. Here the decisive requirement is to block premature deletion of records, and that outcome is not achieved by this action.
C:An operator would use this action to expire obsolete version generations, chiefly when trying to clean up old object versions safely; The current requirement is to block premature deletion of records, which remains unresolved by that operation.
D:It can restore a previous object generation; however, it does not provide the specific operation to block premature deletion of records. The two controls serve different purposes.
E:The tool can hold an object against deletion, but it cannot be substituted for the capability needed to block premature deletion of records. Its operational effect is not equivalent.
Question 440
A transaction file must be protected temporarily from normal lifecycle deletion during an active investigation. Which action is most appropriate?
- Honor the retention lock and wait until the permitted expiration
- Generate a signed URL for the permitted operation and expiration
- Place an appropriate Cloud Storage object hold
- Configure an appropriate retention policy or object retention setting
- Recover the object from an existing noncurrent generation if Object Versioning preserved it
Explanation
Correct Answer
C:Holds prevent applicable object deletion while active. They are different from lifecycle rules that automatically expire eligible objects.
Incorrect Answers
A:For the stated need to preserve investigation evidence, this would instead enforce immutable retention timing; it supports the separate task to reject prohibited early object deletion, not the required configuration.
B:This approach can delegate a temporary object download. The requirement is to preserve investigation evidence, so it controls a different part of the workflow and leaves that result unaddressed.
D:This setting would enforce object retention for compliance. That behavior does not establish the requested ability to preserve investigation evidence; it addresses an adjacent concern instead.
E:Its purpose is to restore a previous object generation. That distinction matters: the scenario calls for an action to preserve investigation evidence, not this separate configuration task.