Question 280
An operational data platform has multiple data products with different replication features. Which implementation matches this requirement?
- Create a regional Cloud Storage bucket in the required region
- Verify replication support and configure each product's native HA or backup mechanism
- Use an appropriate dual-region or multi-region Cloud Storage location
- Create the dataset in the supported required location and keep data movement consistent
- Configure supported Cloud SQL cross-region replication
Explanation
Correct Answer
B:Storage class, regional database HA and cross-region replication are separate product-specific capabilities. Assuming one global toggle provides redundancy across services is incorrect.
Incorrect Answers
A:For the stated need to plan distinct backup and HA controls per service, this would instead place object storage in one region; it supports the separate task to maintain region-local object data, not the required configuration.
C:Administrators use it to store redundant object data across regions, rather than to plan distinct backup and HA controls per service. Applying it would change the wrong component of this deployment.
D:The result of this choice would be to place analytical data in a compliant location. The requested outcome, to plan distinct backup and HA controls per service, is handled at a different layer or through another operation.
E:Select this when the goal is to replicate relational data to another region. Here the decisive requirement is to plan distinct backup and HA controls per service, and that outcome is not achieved by this action.
Question 281
An application has a new managed NFS file share but client VMs cannot mount it. Which TWO checks address the data-path prerequisites before changing storage products? (Choose TWO.)
- Replace the NFS mount command with a BigQuery SQL query
- Confirm the clients have supported network reachability to the file service's address
- Enable a Cloud Storage object lifecycle rule to authorize the NFS client
- Confirm the export or share path and client mount options match the provisioned file service
Explanation
Correct Answers
B:A managed file service still depends on supported VPC networking and routing. Unreachable clients cannot mount the share even if the file service itself is healthy.
D:Network filesystems expose a particular endpoint and export/share path. Incorrect paths, protocol versions, or access settings can cause a mount failure independently of service capacity.
Incorrect Answers
A:BigQuery queries retrieve analytical table data and are not an NFS client mount mechanism. SQL execution cannot mount a provisioned managed filesystem on a VM.
C:Object lifecycle policies govern bucket data transitions and deletions. They neither configure an NFS export nor provide the VM's network reachability to the file service.
Question 282
An application already stores immutable training files in Cloud Storage but a supported Linux analytics tool can only open files through a mount path. The team accepts that object storage is not a fully POSIX-compliant file system. What should it evaluate?
- Use a Cloud Storage lifecycle rule to turn the bucket into an NFS share
- Mount the bucket using Cloud Storage FUSE on a supported client
- Create a BigQuery external table and attach it to the Linux filesystem
- Create a Filestore share and assume it automatically contains the existing Cloud Storage objects
Explanation
Correct Answer
B:Cloud Storage FUSE presents objects through a filesystem interface for supported workloads. Applications must still account for object-storage semantics, caching, and differences from a POSIX filesystem.
Incorrect Answers
A:Lifecycle rules change or delete objects according to age and conditions. They do not expose a bucket as an NFS server or provide filesystem mount semantics.
C:BigQuery external tables provide SQL access to supported external data formats. They do not mount bucket objects as ordinary files for a Linux program.
D:Filestore is a distinct managed NFS filesystem. Provisioning a share does not automatically mirror or expose the objects already held in a separate Cloud Storage bucket.
Question 283
An engineering team must evaluate three different interfaces for existing data: a POSIX-like mounted view of bucket objects, a managed NFS share, and a managed service that supports SMB clients. Which THREE service-interface matches are accurate? (Choose THREE.)
- Google Cloud NetApp Volumes can provide eligible managed SMB file shares
- A BigQuery dataset can be directly mounted as a writable Windows SMB share
- Filestore provides managed NFS file sharing to supported clients
- Cloud Storage FUSE can expose eligible Cloud Storage objects through a mount interface with documented semantic differences
- Changing a bucket from Standard to Archive storage class enables full POSIX rename semantics
Explanation
Correct Answers
A:NetApp Volumes offers managed file-storage capabilities including supported SMB configurations. Protocol, region, and service-tier availability must be checked for the deployment.
C:Filestore is a managed network filesystem suited to applications that use supported NFS mounts. It is different from a Cloud Storage bucket's object API.
D:Cloud Storage FUSE maps object operations to a filesystem-oriented interface. It can serve suitable workloads but is not a full replacement for a POSIX filesystem.
Incorrect Answers
B:BigQuery datasets are analytical data containers accessed through SQL and APIs. They are not network file shares for Windows SMB applications.
E:Storage class affects storage pricing and access characteristics, not the filesystem consistency or rename semantics of bucket objects. It does not turn object storage into POSIX storage.
Question 284
A legacy Linux service expects a mounted NFS path for shared mutable files. What is the most direct solution?
- Evaluate an eligible Google Cloud NetApp Volumes file service
- Use Filestore mounted by the eligible Compute Engine clients
- Evaluate Google Cloud Managed Lustre
- Use Cloud Storage with carefully configured public or signed delivery
Explanation
Correct Answer
B:Filestore presents managed NFS file service semantics. Code expecting POSIX-style file paths cannot use Cloud Storage object API unchanged.
Incorrect Answers
A:Its purpose is to provide managed SMB-capable file storage. That distinction matters: the scenario calls for an action to support shared writable Linux directories, not this separate configuration task.
C:This setting would support massive parallel file reads. That behavior does not establish the requested ability to support shared writable Linux directories; it addresses an adjacent concern instead.
D:While this can serve durable static objects, the present task requires an action to support shared writable Linux directories. This operation does not supply the behavior described in the requirements.
Question 285
Two application teams share an organization but require isolated networks with independent firewall rules. What should be configured?
- Use Shared VPC with a host project and service projects
- Configure VPC Network Peering where route exchange and limitations fit
- Create an ingress allow firewall rule with the specified source range and TCP port 443
- Use a custom mode VPC and add explicit regional subnets
- Create separate custom VPC networks for the teams
Explanation
Correct Answer
E:Separate VPCs have independent network-level configuration and IP routing domains. Shared organizational ownership does not require a common VPC.
Incorrect Answers
A:This mechanism is intended to share one controlled VPC across projects. It does not implement the required action to provide distinct network security boundaries, even though both are relevant to the same general service.
B:It can connect independent VPC networks privately; however, it does not provide the specific operation to provide distinct network security boundaries. The two controls serve different purposes.
C:Select this when the goal is to permit restricted inbound HTTPS traffic. Here the decisive requirement is to provide distinct network security boundaries, and that outcome is not achieved by this action.
D:The result of this choice would be to define custom regional VPC subnets. The requested outcome, to provide distinct network security boundaries, is handled at a different layer or through another operation.
Question 286
Two application projects are connected through VPC Network Peering. Each project can reach the other's VM IP addresses, but one team expects routes learned from a third peered VPC to propagate transitively. What should the engineer explain?
- Change an internal Cloud DNS private zone to a public zone
- Enable the Shared VPC service-project role on one existing peer to make peering transitive
- VPC Network Peering is not transitive; design direct connectivity or an appropriate routing architecture for the third VPC
- Add one default internet route in the first VPC and assume the third VPC will become reachable through the peer
Explanation
Correct Answer
C:VPC Peering connects specified network pairs and does not create transitive reachability through a peer. Routing and overlap constraints still apply to any new network connections.
Incorrect Answers
A:DNS zones affect how names are resolved, not whether an IP route exists between three VPC networks. Changing visibility does not create missing connectivity.
B:Shared VPC centralizes subnet sharing under a host project. It does not change the nontransitive behavior of an existing VPC Network Peering connection.
D:A default route to the internet is not a supported substitute for transitive private peering. The third network needs its own explicit connectivity design.
Question 287
Two separately managed VPCs must exchange private traffic without building a common host project. Which solution should be used?
- Use Shared VPC with a host project and service projects
- Use a custom mode VPC and add explicit regional subnets
- Create separate custom VPC networks for the teams
- Configure VPC Network Peering where route exchange and limitations fit
Explanation
Correct Answer
D:Peering allows private connectivity between eligible VPCs. It is not transitive and does not merge networks or their IAM ownership.
Incorrect Answers
A:While this can share one controlled VPC across projects, the present task requires an action to peer two independent virtual networks. This operation does not supply the behavior described in the requirements.
B:This mechanism is intended to define custom regional VPC subnets. It does not implement the required action to peer two independent virtual networks, even though both are relevant to the same general service.
C:Administrators use it to isolate team networking into separate VPCs, rather than to peer two independent virtual networks. Applying it would change the wrong component of this deployment.
Question 288
A VPC administrator wants subnets in chosen regions and address ranges instead of automatic defaults. How should the team proceed?
- Configure VPC Network Peering where route exchange and limitations fit
- Use a custom mode VPC and add explicit regional subnets
- Renumber conflicting ranges or choose a different supported connectivity design
- Use Shared VPC with a host project and service projects
- Create separate custom VPC networks for the teams
Explanation
Correct Answer
B:Custom mode gives deliberate control over regional subnet CIDRs. Auto mode would create a predefined subnet set and may complicate external address planning.
Incorrect Answers
A:Using this action would connect independent VPC networks privately, not control subnet range allocation manually. Its function is different from the specific change described in the scenario.
C:The choice is aimed at a different purpose: to avoid subnet collisions between networks; Even if it can resolve overlapping address spaces before peering, that would not accomplish the stated requirement to control subnet range allocation manually.
D:It can share one controlled VPC across projects; however, it does not provide the specific operation to control subnet range allocation manually. The two controls serve different purposes.
E:This choice is useful to isolate team networking into separate VPCs. The stated task is to control subnet range allocation manually, which requires a different mechanism or permission scope.
Question 289
A service should receive HTTPS traffic only from a defined source CIDR. Which configuration best meets the requirement?
- Create an egress deny rule scoped to the appropriate target and destination
- Set the target network tags and apply those tags to the intended VMs
- Create an ingress allow firewall rule with the specified source range and TCP port 443
- Use service-account-based firewall targets where supported
Explanation
Correct Answer
C:Ingress firewall rules evaluate source, target and protocol or port filters. The rule must match the intended target and competing policy precedence.
Incorrect Answers
A:While this can block selected outbound destinations, the present task requires an action to allow inbound connections from approved networks. This operation does not supply the behavior described in the requirements.
B:Its purpose is to use VM network tags for firewall targets. That distinction matters: the scenario calls for an action to allow inbound connections from approved networks, not this separate configuration task.
D:Administrators use it to target firewall rules by VM service identity, rather than to allow inbound connections from approved networks. Applying it would change the wrong component of this deployment.
Question 290
An application VM must not initiate outbound connections to a particular external address range. What should be configured?
- Create an ingress allow firewall rule with the specified source range and TCP port 443
- Create an ingress deny rule against packets coming from the specified external destination range
- Create an egress deny rule scoped to the appropriate target and destination
- Set the target network tags and apply those tags to the intended VMs
- Use service-account-based firewall targets where supported
Explanation
Correct Answer
C:Egress firewall rules control outbound packets from target resources. Denying only ingress does not enforce an outbound destination restriction.
Incorrect Answers
A:Select this when the goal is to permit restricted inbound HTTPS traffic. Here the decisive requirement is to prevent VM egress to a prohibited CIDR, and that outcome is not achieved by this action.
B:Ingress filtering handles inbound traffic. The VM must be prevented from initiating outbound connections to a destination, which requires correctly scoped egress policy rather than reversing the flow direction.
D:The tool can use VM network tags for firewall targets, but it cannot be substituted for the capability needed to prevent VM egress to a prohibited CIDR. Its operational effect is not equivalent.
E:This mechanism is intended to target firewall rules by VM service identity. It does not implement the required action to prevent VM egress to a prohibited CIDR, even though both are relevant to the same general service.