Question 50
To remove unnecessary exposed services and privileged entry points, which option most directly provides the capability?
- Kill-chain disruption
- Compensating controls
- Zero-trust verification
- Attack surface reduction
- Threat modeling
Explanation
Correct Answer
D:Shrinking reachable and executable components leaves fewer opportunities for initial access and escalation; that is why it addresses the operational task to remove unnecessary exposed services and privileged entry points.
Incorrect Answers
A:Breaking an earlier attack phase can prevent later stages even if other activity remains undetected; that is useful when the task is to choose a defensive checkpoint before payload execution or objective completion, not the stated requirement to remove unnecessary exposed services and privileged entry points.
B:Temporary segmentation, monitoring or access limits lower exposure until a durable fix is available; a team would select it to treat a vulnerability when immediate patching is operationally impossible, which does not provide the particular result to remove unnecessary exposed services and privileged entry points.
C:Continuous authorization avoids treating mere presence on a private subnet as proof of trust; its operational purpose is to require each resource request to be evaluated against identity and context, not to achieve the specific requirement to remove unnecessary exposed services and privileged entry points.
E:Structured analysis of assets, trust boundaries and attacker goals guides controls during design; it addresses the different need to identify likely attack paths before a new service is deployed, leaving the requested ability to remove unnecessary exposed services and privileged entry points unresolved.
Question 51
To improve detections by jointly testing attacker emulation and defender response, which control achieves the target outcome?
- Threat modeling
- Compensating controls
- Purple-team exercises
- Attack surface reduction
Explanation
Correct Answer
C:Cooperative simulation validates whether observable behavior produces useful alerts and timely investigation; its relevant protective or investigative effect is to improve detections by jointly testing attacker emulation and defender response.
Incorrect Answers
A:Structured analysis of assets, trust boundaries and attacker goals guides controls during design; it could help someone trying to identify likely attack paths before a new service is deployed, but the problem is instead to improve detections by jointly testing attacker emulation and defender response.
B:Temporary segmentation, monitoring or access limits lower exposure until a durable fix is available; that is useful when the task is to treat a vulnerability when immediate patching is operationally impossible, not the stated requirement to improve detections by jointly testing attacker emulation and defender response.
D:Shrinking reachable and executable components leaves fewer opportunities for initial access and escalation; its operational purpose is to remove unnecessary exposed services and privileged entry points, not to achieve the specific requirement to improve detections by jointly testing attacker emulation and defender response.
Question 52
To treat a vulnerability when immediate patching is operationally impossible, which solution should be adopted?
- Compensating controls
- Purple-team exercises
- Security baseline drift detection
- Risk-based remediation
Explanation
Correct Answer
A:Temporary segmentation, monitoring or access limits lower exposure until a durable fix is available; the requested outcome is precisely to treat a vulnerability when immediate patching is operationally impossible.
Incorrect Answers
B:Cooperative simulation validates whether observable behavior produces useful alerts and timely investigation; it could help someone trying to improve detections by jointly testing attacker emulation and defender response, but the problem is instead to treat a vulnerability when immediate patching is operationally impossible.
C:Comparisons against a versioned standard expose unauthorized or accidental configuration changes; that is useful when the task is to identify systems that no longer match approved hardening settings, not the stated requirement to treat a vulnerability when immediate patching is operationally impossible.
D:Prioritization combines exploitability, asset importance and reachable attack paths to allocate limited effort; a team would select it to fix weaknesses by exposure and business consequence rather than raw counts, which does not provide the particular result to treat a vulnerability when immediate patching is operationally impossible.
Question 53
To identify systems that no longer match approved hardening settings, which of the available controls is suitable?
- Risk-based remediation
- Security baseline drift detection
- Compensating controls
- Continuous control validation
Explanation
Correct Answer
B:Comparisons against a versioned standard expose unauthorized or accidental configuration changes; this choice fits the scenario because the team must identify systems that no longer match approved hardening settings.
Incorrect Answers
A:Prioritization combines exploitability, asset importance and reachable attack paths to allocate limited effort; the outcome it supports is to fix weaknesses by exposure and business consequence rather than raw counts, whereas this scenario asks defenders to identify systems that no longer match approved hardening settings.
C:Temporary segmentation, monitoring or access limits lower exposure until a durable fix is available; it could help someone trying to treat a vulnerability when immediate patching is operationally impossible, but the problem is instead to identify systems that no longer match approved hardening settings.
D:Repeatable exercises check real enforcement instead of assuming a documented configuration remains effective. This can help to test whether protective rules still work after infrastructure changes, but it does not provide the particular mechanism required to identify systems that no longer match approved hardening settings.
Question 54
To test whether protective rules still work after infrastructure changes, which option is the direct technical match?
- Security baseline drift detection
- Continuous control validation
- Compensating controls
- Purple-team exercises
Explanation
Correct Answer
B:Repeatable exercises check real enforcement instead of assuming a documented configuration remains effective; this mechanism directly supports the requirement to test whether protective rules still work after infrastructure changes.
Incorrect Answers
A:Comparisons against a versioned standard expose unauthorized or accidental configuration changes; its mechanism supports identify systems that no longer match approved hardening settings, while the requested control must be able to test whether protective rules still work after infrastructure changes.
C:Temporary segmentation, monitoring or access limits lower exposure until a durable fix is available; although relevant to treat a vulnerability when immediate patching is operationally impossible, it does not by itself achieve the required task to test whether protective rules still work after infrastructure changes.
D:Cooperative simulation validates whether observable behavior produces useful alerts and timely investigation; it could help someone trying to improve detections by jointly testing attacker emulation and defender response, but the problem is instead to test whether protective rules still work after infrastructure changes.
Question 55
To fix weaknesses by exposure and business consequence rather than raw counts, what technique should the team use?
- Security baseline drift detection
- Attack surface reduction
- Risk-based remediation
- Purple-team exercises
- Continuous control validation
Explanation
Correct Answer
C:Prioritization combines exploitability, asset importance and reachable attack paths to allocate limited effort; it supplies the specific control needed to fix weaknesses by exposure and business consequence rather than raw counts.
Incorrect Answers
A:Comparisons against a versioned standard expose unauthorized or accidental configuration changes; the technique works for situations involving identify systems that no longer match approved hardening settings, rather than this need to fix weaknesses by exposure and business consequence rather than raw counts.
B:Shrinking reachable and executable components leaves fewer opportunities for initial access and escalation; its mechanism supports remove unnecessary exposed services and privileged entry points, while the requested control must be able to fix weaknesses by exposure and business consequence rather than raw counts.
D:Cooperative simulation validates whether observable behavior produces useful alerts and timely investigation; although relevant to improve detections by jointly testing attacker emulation and defender response, it does not by itself achieve the required task to fix weaknesses by exposure and business consequence rather than raw counts.
E:Repeatable exercises check real enforcement instead of assuming a documented configuration remains effective; it could help someone trying to test whether protective rules still work after infrastructure changes, but the problem is instead to fix weaknesses by exposure and business consequence rather than raw counts.
Question 56
To set organization-wide security expectations with management authority, which protective or investigative measure applies?
- Information security policy
- Data classification policy
- Remote-access policy
- Acceptable-use policy
Explanation
Correct Answer
A:A top-level policy defines intent, scope and accountability; standards and procedures translate it into implementable rules; that is why it addresses the operational task to set organization-wide security expectations with management authority.
Incorrect Answers
B:Classification criteria guide access, handling and retention choices across multiple systems; the technique works for situations involving assign protection levels based on the sensitivity of information, rather than this need to set organization-wide security expectations with management authority.
C:Formal remote access rules cover authentication, managed devices and access approval independent of a VPN product; its mechanism supports specify requirements for workers connecting from untrusted networks, while the requested control must be able to set organization-wide security expectations with management authority.
D:Documented acceptable use establishes behavioral boundaries and enforceable expectations for users; the outcome it supports is to define permitted employee use of corporate networks and equipment, whereas this scenario asks defenders to set organization-wide security expectations with management authority.
Question 57
To define permitted employee use of corporate networks and equipment, what is the most direct option?
- Change management procedure
- Data classification policy
- Acceptable-use policy
- Information security policy
- Remote-access policy
- Password policy
Explanation
Correct Answer
C:Documented acceptable use establishes behavioral boundaries and enforceable expectations for users; its relevant protective or investigative effect is to define permitted employee use of corporate networks and equipment.
Incorrect Answers
A:A tracked change process identifies owners, tests, approvals and recovery paths before configuration reaches production; applying it would serve require authorization and rollback steps before modifying production routers without directly satisfying the goal to define permitted employee use of corporate networks and equipment.
B:Classification criteria guide access, handling and retention choices across multiple systems; it addresses the different need to assign protection levels based on the sensitivity of information, leaving the requested ability to define permitted employee use of corporate networks and equipment unresolved.
D:A top-level policy defines intent, scope and accountability; standards and procedures translate it into implementable rules; its mechanism supports set organization-wide security expectations with management authority, while the requested control must be able to define permitted employee use of corporate networks and equipment.
E:Formal remote access rules cover authentication, managed devices and access approval independent of a VPN product; the outcome it supports is to specify requirements for workers connecting from untrusted networks, whereas this scenario asks defenders to define permitted employee use of corporate networks and equipment.
F:Account policy defines credential creation, protection and reset requirements rather than configuring individual firewall rules; although relevant to establish acceptable authentication-secret handling for workforce accounts, it does not by itself achieve the required task to define permitted employee use of corporate networks and equipment.
Question 58
To specify requirements for workers connecting from untrusted networks, what should defenders select?
- Remote-access policy
- Information security policy
- Acceptable-use policy
- Password policy
Explanation
Correct Answer
A:Formal remote access rules cover authentication, managed devices and access approval independent of a VPN product; the requested outcome is precisely to specify requirements for workers connecting from untrusted networks.
Incorrect Answers
B:A top-level policy defines intent, scope and accountability; standards and procedures translate it into implementable rules; applying it would serve set organization-wide security expectations with management authority without directly satisfying the goal to specify requirements for workers connecting from untrusted networks.
C:Documented acceptable use establishes behavioral boundaries and enforceable expectations for users; it addresses the different need to define permitted employee use of corporate networks and equipment, leaving the requested ability to specify requirements for workers connecting from untrusted networks unresolved.
D:Account policy defines credential creation, protection and reset requirements rather than configuring individual firewall rules; the technique works for situations involving establish acceptable authentication-secret handling for workforce accounts, rather than this need to specify requirements for workers connecting from untrusted networks.
Question 59
To establish acceptable authentication-secret handling for workforce accounts, which mechanism best fits?
- Information security policy
- Data classification policy
- Remote-access policy
- Password policy
Explanation
Correct Answer
D:Account policy defines credential creation, protection and reset requirements rather than configuring individual firewall rules; this choice fits the scenario because the team must establish acceptable authentication-secret handling for workforce accounts.
Incorrect Answers
A:A top-level policy defines intent, scope and accountability; standards and procedures translate it into implementable rules; a team would select it to set organization-wide security expectations with management authority, which does not provide the particular result to establish acceptable authentication-secret handling for workforce accounts.
B:Classification criteria guide access, handling and retention choices across multiple systems. This can help to assign protection levels based on the sensitivity of information, but it does not provide the particular mechanism required to establish acceptable authentication-secret handling for workforce accounts.
C:Formal remote access rules cover authentication, managed devices and access approval independent of a VPN product; applying it would serve specify requirements for workers connecting from untrusted networks without directly satisfying the goal to establish acceptable authentication-secret handling for workforce accounts.
Question 60
To assign protection levels based on the sensitivity of information, which measure best meets the requirement?
- Data classification policy
- Change management procedure
- Password policy
- Remote-access policy
- Exception register
Explanation
Correct Answer
A:Classification criteria guide access, handling and retention choices across multiple systems; this mechanism directly supports the requirement to assign protection levels based on the sensitivity of information.
Incorrect Answers
B:A tracked change process identifies owners, tests, approvals and recovery paths before configuration reaches production; a team would select it to require authorization and rollback steps before modifying production routers, which does not provide the particular result to assign protection levels based on the sensitivity of information.
C:Account policy defines credential creation, protection and reset requirements rather than configuring individual firewall rules; its operational purpose is to establish acceptable authentication-secret handling for workforce accounts, not to achieve the specific requirement to assign protection levels based on the sensitivity of information.
D:Formal remote access rules cover authentication, managed devices and access approval independent of a VPN product; applying it would serve specify requirements for workers connecting from untrusted networks without directly satisfying the goal to assign protection levels based on the sensitivity of information.
E:Approved exceptions record justification, compensating safeguards, ownership and expiry for review; it addresses the different need to document a temporary deviation from a mandatory security standard, leaving the requested ability to assign protection levels based on the sensitivity of information unresolved.