CompTIA XK0-006 (CompTIA Linux+) Practice Test 56

Question 550

Network switches should report interface counter data using a standard management protocol. Which protocol commonly supplies it?

  1. Webhook notification
  2. SNMP polling
  3. SNMP trap
  4. SNMP management information bases (MIBs)

Explanation

Correct Answer

B:

SNMP can retrieve indexed management variables, such as traffic counters, from managed devices. Polling gives periodic observations rather than immediate push events.

Incorrect Answers

A:

A webhook sends an HTTP request in response to an event; it will not provide collecting network-device counters periodically under these conditions.

C:

A trap sends an event notification from an agent to a manager; the requirement is collecting network-device counters periodically, outside the effect of this choice.

D:

MIBs describe the names, types and meanings of SNMP-managed objects; it does not deliver collecting network-device counters periodically, which is decisive in this scenario.

Question 551

A monthly objective is repeatedly missed even though its alert threshold never fires. What alignment should be reviewed?

  1. Allowable error budget
  2. Alert thresholds relative to the SLO and SLI
  3. 95th-percentile request latency
  4. Service-level indicator (SLI)
  5. Service-level objective (SLO)

Explanation

Correct Answer

B:

Monitoring thresholds must reflect the reliability target and measurement window. Poorly selected thresholds can miss breaches despite telemetry being present.

Incorrect Answers

A:

An error budget represents the tolerated time or request failures implied by an SLO; the task involves aligning operational alerts with reliability objectives, whereas this addresses another subsystem.

C:

A high percentile exposes slow experiences affecting a fraction of users that averages can hide; that is not equivalent to aligning operational alerts with reliability objectives.

D:

An SLI is a quantitative measure of actual service behavior, such as success ratio or latency; the administrator instead needs aligning operational alerts with reliability objectives; this option serves a different purpose.

E:

An SLO defines a desired threshold for a service-level indicator over a chosen period; it answers a neighboring question rather than aligning operational alerts with reliability objectives.

Question 552

Multiple processes fail after one filesystem outage, producing hundreds of redundant alerts. What feature helps reduce noise?

  1. Alert correlation and deduplication
  2. Alert hysteresis
  3. Sustained-duration alert evaluation
  4. Telemetry freshness or missing-data alarm

Explanation

Correct Answer

A:

Grouping alerts by shared incident or root cause avoids repeated notifications. It helps responders focus on the triggering failure.

Incorrect Answers

B:

Different trigger and clear thresholds prevent repeated state changes around one boundary; this does not achieve suppressing duplicate symptoms of one incident on the system described.

C:

Requiring a condition to remain true for a specified interval filters transient bursts; it will not provide suppressing duplicate symptoms of one incident under these conditions.

D:

Monitoring the absence of expected reports detects failures in the agent or data pipeline; using it would leave suppressing duplicate symptoms of one incident unresolved.

Question 553

The team can observe host metrics but lacks a historical record of which alert policy changed. Which operational control should be added?

  1. Version-controlled monitoring configuration
  2. Notification routing
  3. Telemetry freshness or missing-data alarm
  4. Deployment event annotations

Explanation

Correct Answer

A:

Tracking alert rules and their review history supports rollback and reproducibility. Configuration provenance helps explain changes in alert behavior.

Incorrect Answers

B:

Notification policies deliver triggered alerts to appropriate recipients or escalation channels; the evidence calls for auditing and reverting alert-rule changes, not merely this separate operation.

C:

Monitoring the absence of expected reports detects failures in the agent or data pipeline; the task involves auditing and reverting alert-rule changes, whereas this addresses another subsystem.

D:

Change events overlaid on telemetry provide context for correlation; its scope differs from auditing and reverting alert-rule changes, so it cannot meet the stated requirement.

Question 554

A short 100% CPU spike should not page a human unless it persists five minutes. Which rule is appropriate?

  1. Alert correlation and deduplication
  2. Telemetry freshness or missing-data alarm
  3. Deployment event annotations
  4. Sustained-duration alert evaluation

Explanation

Correct Answer

D:

Requiring a condition to remain true for a specified interval filters transient bursts. The delay should reflect the service's risk and response needs.

Incorrect Answers

A:

Grouping alerts by shared incident or root cause avoids repeated notifications; the administrator instead needs alerting only after sustained threshold violations; this option serves a different purpose.

B:

Monitoring the absence of expected reports detects failures in the agent or data pipeline; it answers a neighboring question rather than alerting only after sustained threshold violations.

C:

Change events overlaid on telemetry provide context for correlation; that changes a different part of the system; the requested outcome is alerting only after sustained threshold violations.

Question 555

The team cannot install an agent on a vendor appliance but still needs metrics through externally accessible endpoints. Which model applies?

  1. Application health check
  2. Webhook notification
  3. SNMP trap
  4. Agentless monitoring

Explanation

Correct Answer

D:

Agentless checks obtain data over existing protocols without a dedicated local monitoring process. Visibility may be narrower than a host-resident agent.

Incorrect Answers

A:

Health checks test a service's declared readiness or liveness with explicit success criteria; using it would leave monitoring a system without installing a local agent unresolved.

B:

A webhook sends an HTTP request in response to an event; the requirement is monitoring a system without installing a local agent, outside the effect of this choice.

C:

A trap sends an event notification from an agent to a manager; it does not deliver monitoring a system without installing a local agent, which is decisive in this scenario.

Question 556

A disk usage alarm must trigger above 90% and clear only below 85% to avoid rapid flapping. What principle is this?

  1. Alert correlation and deduplication
  2. Alert hysteresis
  3. Sustained-duration alert evaluation
  4. Deployment event annotations

Explanation

Correct Answer

B:

Different trigger and clear thresholds prevent repeated state changes around one boundary. It improves signal quality when measurements fluctuate.

Incorrect Answers

A:

Grouping alerts by shared incident or root cause avoids repeated notifications; its scope differs from avoiding repeated alert toggling near a threshold, so it cannot meet the stated requirement.

C:

Requiring a condition to remain true for a specified interval filters transient bursts; the administrator instead needs avoiding repeated alert toggling near a threshold; this option serves a different purpose.

D:

Change events overlaid on telemetry provide context for correlation; it answers a neighboring question rather than avoiding repeated alert toggling near a threshold.

Question 557

A service offers 99.9% availability over a calendar month. Which operational quantity is derived from this target?

  1. Successful-request ratio
  2. Service-level objective (SLO)
  3. 95th-percentile request latency
  4. Service-level agreement (SLA)
  5. Allowable error budget

Explanation

Correct Answer

E:

An error budget represents the tolerated time or request failures implied by an SLO. It can guide release risk and incident prioritization.

Incorrect Answers

A:

Counting application-level successful responses detects failures even if the process is running; this does not achieve translating an SLO into tolerated unreliability on the system described.

B:

An SLO defines a desired threshold for a service-level indicator over a chosen period; it will not provide translating an SLO into tolerated unreliability under these conditions.

C:

A high percentile exposes slow experiences affecting a fraction of users that averages can hide; using it would leave translating an SLO into tolerated unreliability unresolved.

D:

An SLA is a formal commitment between provider and customer with terms, responsibilities and potential remedies; the requirement is translating an SLO into tolerated unreliability, outside the effect of this choice.

Question 558

A team sets a target of 99.95% successful API requests over a rolling 30-day window. Which concept names that target?

  1. Allowable error budget
  2. Successful-request ratio
  3. Service-level indicator (SLI)
  4. Service-level objective (SLO)

Explanation

Correct Answer

D:

An SLO defines a desired threshold for a service-level indicator over a chosen period. It can be stricter than the contractual SLA.

Incorrect Answers

A:

An error budget represents the tolerated time or request failures implied by an SLO; the evidence calls for defining a measurable reliability target, not merely this separate operation.

B:

Counting application-level successful responses detects failures even if the process is running; the task involves defining a measurable reliability target, whereas this addresses another subsystem.

C:

An SLI is a quantitative measure of actual service behavior, such as success ratio or latency; its scope differs from defining a measurable reliability target, so it cannot meet the stated requirement.

Question 559

A production alert fires, and the monitoring system must route it to an on-call engineer's pager. Which monitoring function handles delivery?

  1. Notification routing
  2. Alert correlation and deduplication
  3. Alert hysteresis
  4. Deployment event annotations
  5. Telemetry freshness or missing-data alarm
  6. Version-controlled monitoring configuration

Explanation

Correct Answer

A:

Notification policies deliver triggered alerts to appropriate recipients or escalation channels. They are distinct from collecting raw events.

Incorrect Answers

B:

Grouping alerts by shared incident or root cause avoids repeated notifications; that changes a different part of the system; the requested outcome is sending a triggered alert to the on-call responder.

C:

Different trigger and clear thresholds prevent repeated state changes around one boundary; this does not achieve sending a triggered alert to the on-call responder on the system described.

D:

Change events overlaid on telemetry provide context for correlation; it will not provide sending a triggered alert to the on-call responder under these conditions.

E:

Monitoring the absence of expected reports detects failures in the agent or data pipeline; using it would leave sending a triggered alert to the on-call responder unresolved.

F:

Tracking alert rules and their review history supports rollback and reproducibility; the requirement is sending a triggered alert to the on-call responder, outside the effect of this choice.

Question 560

A reliability report must include an observed numerical success metric and a quantified target for that metric. Which TWO service-level concepts correspond to those roles? Choose TWO.

  1. Alert thresholds relative to the SLO and SLI
  2. Service-level agreement (SLA)
  3. Service-level objective (SLO)
  4. Allowable error budget
  5. Service-level indicator (SLI)

Explanation

Correct Answers

C:

An SLO specifies the desired target for a service-level indicator over a defined period, such as 99.95 percent successful requests. The SLI provides the observed measurements that can be compared with that target.

E:

An SLI is a quantitative measure of actual service behavior, such as success ratio or latency. It is the signal compared against a target.

Incorrect Answers

A:

Monitoring thresholds must reflect the reliability target and measurement window; the requirement is pairing observed service quality with a reliability target, outside the effect of this choice.

B:

An SLA is a formal commitment between provider and customer with terms, responsibilities and potential remedies; it does not deliver pairing observed service quality with a reliability target, which is decisive in this scenario.

D:

An error budget represents the tolerated time or request failures implied by an SLO; the task involves pairing observed service quality with a reliability target, whereas this addresses another subsystem.

CompTIA Linux+ (XK0-006) Practice Tests