Question 320
Log files must rotate by size or schedule and old generations should be compressed. Which tool is designed for this?
- journalctl --since '1 hour ago'
- logrotate
- aureport
- auditd
Explanation
Correct Answer
B:logrotate applies per-log policies for rotation, retention and optional compression. Services may need reopen signals when file handles change.
Incorrect Answers
A:journalctl queries stored systemd journal entries and supports time, unit and priority filters; the requirement is rotating and retaining service log files, outside the effect of this choice.
C:aureport aggregates stored audit events into categories and counts; the evidence calls for rotating and retaining service log files, not merely this separate operation.
D:auditd receives Linux audit-subsystem events according to configured rules; the task involves rotating and retaining service log files, whereas this addresses another subsystem.
Question 321
A team needs evidence of which administrator executed a privileged operation and when. Which security function does that represent?
- Kerberos authentication
- Accounting and audit logging
- Polkit
- SSSD
Explanation
Correct Answer
B:Accounting records actions and associated identities for later review. Such records complement authentication and access enforcement but are not substitutes for them.
Incorrect Answers
A:Kerberos uses tickets from a trusted key distribution center to authenticate principals to services; that is not equivalent to recording attributable user activity.
C:Polkit mediates policy-based authorization for privileged actions requested by unprivileged processes; it answers a neighboring question rather than recording attributable user activity.
D:The System Security Services Daemon integrates supported identity providers and can cache identity and credentials according to policy; that changes a different part of the system; the requested outcome is recording attributable user activity.
Question 322
The monthly report requires summarized counts of audited authentication-related activity. Which audit utility produces reports?
- rsyslog
- aureport
- ausearch
- logrotate
Explanation
Correct Answer
B:aureport aggregates stored audit events into categories and counts. It relies on the quality and completeness of audit rules and retained logs.
Incorrect Answers
A:rsyslog processes syslog messages, applies routing rules and can forward them across the network; it will not provide summarizing audit events for reporting under these conditions.
C:ausearch queries audit records using identifiers and filters; the requirement is summarizing audit events for reporting, outside the effect of this choice.
D:logrotate applies per-log policies for rotation, retention and optional compression; it does not deliver summarizing audit events for reporting, which is decisive in this scenario.
Question 323
A gateway should translate internal client source addresses to its own public address for outbound internet sessions. Which function is required?
- Destination NAT (DNAT)
- DNAT with destination-port rewrite
- Port Address Translation (PAT)
- Source NAT (SNAT)
- Stateless packet filtering
Explanation
Correct Answer
D:SNAT rewrites packet source addresses for egress traffic and tracks return mappings. Masquerading is a common variant for changing external addresses.
Incorrect Answers
A:DNAT rewrites the destination address or port before forwarding to the intended private service; the task involves rewriting private outbound source addresses, whereas this addresses another subsystem.
B:Destination NAT can change both destination address and service port as packets enter the gateway; its scope differs from rewriting private outbound source addresses, so it cannot meet the stated requirement.
C:PAT multiplexes connections through one public address by adjusting transport ports as needed; that is not equivalent to rewriting private outbound source addresses.
E:Stateless filtering evaluates each packet against rules independently of flow history; it answers a neighboring question rather than rewriting private outbound source addresses.
Question 324
A Linux firewall configuration should use nftables' native rule language and sets rather than the iptables compatibility interface. Which engine is appropriate?
- nftables
- iptables -A INPUT ...
- ufw status numbered
- Conntrack state match
Explanation
Correct Answer
A:nftables is a modern Netfilter ruleset framework supporting tables, chains, sets and state matching. It operates in the Linux networking stack.
Incorrect Answers
B:iptables manipulates the traditional chain/rule abstraction, possibly through an nft backend on modern distributions; this does not achieve managing native nftables firewall objects on the system described.
C:UFW can list configured rules with stable display numbers for the current listing; it will not provide managing native nftables firewall objects under these conditions.
D:Netfilter connection tracking recognizes flows such as established and related traffic; using it would leave managing native nftables firewall objects unresolved.
Question 325
A UFW operator must see numbered active firewall rules before deleting one. Which command provides them?
- iptables -A INPUT ...
- nftables
- ipset or nftables set
- ufw status numbered
- ufw allow 443/tcp
- Conntrack state match
Explanation
Correct Answer
D:UFW can list configured rules with stable display numbers for the current listing. Number references can shift after changes.
Incorrect Answers
A:iptables manipulates the traditional chain/rule abstraction, possibly through an nft backend on modern distributions; it does not deliver enumerating UFW rules with deletion indices, which is decisive in this scenario.
B:nftables is a modern Netfilter ruleset framework supporting tables, chains, sets and state matching; the evidence calls for enumerating UFW rules with deletion indices, not merely this separate operation.
C:Address sets allow a rule to test membership in many IP values efficiently; the task involves enumerating UFW rules with deletion indices, whereas this addresses another subsystem.
E:UFW provides a simplified frontend to host firewall rules; that is not equivalent to enumerating UFW rules with deletion indices.
F:Netfilter connection tracking recognizes flows such as established and related traffic; the administrator instead needs enumerating UFW rules with deletion indices; this option serves a different purpose.
Question 326
A one-time test should allow a port in the current firewalld runtime but not after reload. Which approach fits?
- Firewalld zones
- firewall-cmd --add-port=8443/tcp
- firewall-cmd --permanent --add-service=ssh
- firewall-cmd --zone=public --list-all
Explanation
Correct Answer
B:A runtime command modifies active rules without changing permanent configuration. Reloading firewalld discards runtime-only changes.
Incorrect Answers
A:Zones associate interfaces or sources with collections of allowed services and ports; the administrator instead needs opening a temporary runtime firewall port; this option serves a different purpose.
C:The permanent flag changes saved zone configuration rather than only the current runtime; that changes a different part of the system; the requested outcome is opening a temporary runtime firewall port.
D:The list-all view reports the chosen zone's ports, services, interfaces and sources; this does not achieve opening a temporary runtime firewall port on the system described.
Question 327
A known service such as HTTPS must be allowed by its predefined firewalld definition. Which operation expresses that intent?
- firewall-cmd --add-service=https
- firewall-cmd --permanent --add-service=ssh
- firewall-cmd --zone=public --list-all
- Firewalld zones
Explanation
Correct Answer
A:Adding a service uses firewalld's defined port/protocol mapping for that service. This can be clearer than manually maintaining its numeric port.
Incorrect Answers
B:The permanent flag changes saved zone configuration rather than only the current runtime; the requirement is allowing a named service using firewalld definitions, outside the effect of this choice.
C:The list-all view reports the chosen zone's ports, services, interfaces and sources; it does not deliver allowing a named service using firewalld definitions, which is decisive in this scenario.
D:Zones associate interfaces or sources with collections of allowed services and ports; the evidence calls for allowing a named service using firewalld definitions, not merely this separate operation.
Question 328
A Linux gateway receives a dynamically assigned public IPv4 address from its ISP. Private LAN clients need source NAT, but the administrator must not hard-code a public IP that could change. Which nftables NAT statement is appropriate?
- masquerade
- snat to 198.51.100.10
- dnat to 10.0.0.5
- redirect to :3128
- ct state established
Explanation
Correct Answer
A:The nftables masquerade statement performs source NAT using the address of the selected outgoing interface. It is suited to gateways whose external address can change.
Incorrect Answers
B:A literal snat address fixes the translated source IP to a specific value. That becomes stale when the ISP changes the gateway address.
C:dnat rewrites the packet destination, most commonly for inbound forwarding. The gateway instead needs a source-address rewrite for outbound clients.
D:redirect rewrites the destination to a local address or port for transparent local interception; it does not substitute for outbound source masquerading.
E:A connection-tracking state expression matches packets belonging to existing flows. The match alone never rewrites a source IP address.
Question 329
An interface is moved from a trusted LAN to an untrusted external segment. Which firewalld concept can apply a different policy set?
- Firewalld zones
- firewall-cmd --add-service=https
- Firewalld rich rule with source address
- firewall-cmd --add-port=8443/tcp
Explanation
Correct Answer
A:Zones associate interfaces or sources with collections of allowed services and ports. Correct zone assignment is critical for effective policy.
Incorrect Answers
B:Adding a service uses firewalld's defined port/protocol mapping for that service; it will not provide selecting rules according to interface trust level under these conditions.
C:Rich rules combine conditions such as source address and service with actions; using it would leave selecting rules according to interface trust level unresolved.
D:A runtime command modifies active rules without changing permanent configuration; the requirement is selecting rules according to interface trust level, outside the effect of this choice.
Question 330
A firewall should allow packets based solely on addresses and port fields, without remembering previous connections. Which model describes it?
- Stateless packet filtering
- Destination NAT (DNAT)
- SNAT on egress
- DNAT with destination-port rewrite
- Source NAT (SNAT)
Explanation
Correct Answer
A:Stateless filtering evaluates each packet against rules independently of flow history. Stateful policy uses connection-tracking context to recognize return traffic.
Incorrect Answers
B:DNAT rewrites the destination address or port before forwarding to the intended private service; the task involves evaluating packets without connection history, whereas this addresses another subsystem.
C:Egress SNAT changes the source information so replies can be routed back through the translating gateway; its scope differs from evaluating packets without connection history, so it cannot meet the stated requirement.
D:Destination NAT can change both destination address and service port as packets enter the gateway; that is not equivalent to evaluating packets without connection history.
E:SNAT rewrites packet source addresses for egress traffic and tracks return mappings; the administrator instead needs evaluating packets without connection history; this option serves a different purpose.