Question 20
A diskless workstation receives a boot program over the network before its operating system loads. Which technology supports this workflow?
- GRUB2 bootloader menu
- root= kernel argument
- PXE network boot
- systemd as initial userspace process
Explanation
Correct Answer
C:Preboot Execution Environment uses firmware network support, typically DHCP and a boot server, to obtain initial startup software. It operates before the locally installed OS runs.
Incorrect Answers
A:GRUB2 selects a boot entry and loads the chosen kernel with its parameters; the requirement is starting a system using firmware network boot, outside the effect of this choice.
B:The root parameter tells the kernel or initramfs which filesystem should become the operating system root; it does not deliver starting a system using firmware network boot, which is decisive in this scenario.
D:A diskless boot still eventually runs a userspace PID 1; that is downstream of fetching the initial boot image. systemd subsequently starts units and manages service dependencies; the task involves starting a system using firmware network boot, whereas this addresses another subsystem.
Question 21
An installer offers an AMD64 image for conventional 64-bit Intel and AMD servers. Which architecture does it describe?
- AArch64
- x86_64
- Debian-derived distributions
- RISC-V
Explanation
Correct Answer
B:AMD64 and x86_64 commonly name the same 64-bit x86 instruction-set architecture. The term does not restrict the package to AMD-manufactured CPUs.
Incorrect Answers
A:AArch64 denotes the 64-bit ARM execution environment; that is not equivalent to interpreting the AMD64 architecture label.
C:Debian and Ubuntu commonly use dpkg with apt as a higher-level frontend; it answers a neighboring question rather than interpreting the AMD64 architecture label.
D:RISC-V is an open instruction-set architecture with multiple implementations; that changes a different part of the system; the requested outcome is interpreting the AMD64 architecture label.
Question 22
A driver loads automatically but should be prevented from loading through normal module requests. Which configuration is appropriate?
- modinfo driver_name
- A modprobe.d blacklist entry
- rmmod driver_name
- lsmod
Explanation
Correct Answer
B:A blacklist tells modprobe not to resolve matching internal aliases into that module during automatic loading. Explicit loads or initramfs contents may need separate controls.
Incorrect Answers
A:modinfo reads metadata embedded in a kernel module, such as its license, description and parameters; it will not provide restricting automatic module selection under these conditions.
C:rmmod removes a loaded module if references permit it; the requirement is restricting automatic module selection, outside the effect of this choice.
D:lsmod lists currently loaded kernel modules along with size and use-count information; it does not deliver restricting automatic module selection, which is decisive in this scenario.
Question 23
A graphics workstation must display per-GPU utilization from supported NVIDIA and other GPU drivers. Which tool offers an interactive view?
- lscpu
- dmesg
- nvtop
- dmidecode
Explanation
Correct Answer
C:nvtop provides a top-like interactive view of GPU processes and utilization on supported drivers. It is not a general disk or CPU topology reporting utility.
Incorrect Answers
A:lscpu summarizes CPU topology and architecture reported by the kernel; the task involves viewing active GPU workloads, whereas this addresses another subsystem.
B:dmesg reads messages from the kernel ring buffer, including driver detection and hardware faults; its scope differs from viewing active GPU workloads, so it cannot meet the stated requirement.
D:dmidecode decodes DMI/SMBIOS tables to report firmware, board and system inventory; the administrator instead needs viewing active GPU workloads; this option serves a different purpose.
Question 24
After replacing module files, an administrator needs to regenerate the dependency indexes consulted by modprobe. Which command does this?
- depmod -a
- rmmod driver_name
- A modprobe.d blacklist entry
- modprobe driver_name
- modinfo driver_name
Explanation
Correct Answer
A:depmod generates module dependency and alias information for the installed kernel modules. It prepares module metadata rather than loading a driver.
Incorrect Answers
B:rmmod removes a loaded module if references permit it; this does not achieve regenerating the module dependency database on the system described.
C:A blacklist tells modprobe not to resolve matching internal aliases into that module during automatic loading; it will not provide regenerating the module dependency database under these conditions.
D:modprobe consults module dependency information to load a driver, while depmod is responsible for generating those indexes. insmod directly inserts a single module file without dependency resolution; using it would leave regenerating the module dependency database unresolved.
E:modinfo reads metadata embedded in a kernel module, such as its license, description and parameters; the requirement is regenerating the module dependency database, outside the effect of this choice.
Question 25
A boot update produced an initramfs named for the wrong kernel release. Which property must match the selected boot entry?
- ipmitool chassis power status
- dracut --force
- The initramfs image used by the boot entry
- The initramfs kernel-module version
Explanation
Correct Answer
D:Kernel modules inside an initramfs must be compatible with the kernel being loaded. A version mismatch can prevent the early storage stack from initializing.
Incorrect Answers
A:ipmitool can query or control supported baseboard management controllers through IPMI; it does not deliver aligning early boot drivers with the loaded kernel, which is decisive in this scenario.
B:dracut builds an initramfs with the modules needed in early boot; the evidence calls for aligning early boot drivers with the loaded kernel, not merely this separate operation.
C:Early boot cannot read the real root filesystem to load missing drivers from it; the task involves aligning early boot drivers with the loaded kernel, whereas this addresses another subsystem.
Question 26
A technician wants module parameters and declared aliases before activating a driver. Which command is most appropriate?
- rmmod driver_name
- depmod -a
- modprobe driver_name
- lsmod
- A modprobe.d blacklist entry
- modinfo driver_name
Explanation
Correct Answer
F:modinfo reads metadata embedded in a kernel module, such as its license, description and parameters. It does not insert the module into the running kernel.
Incorrect Answers
A:rmmod removes a loaded module if references permit it; the administrator instead needs inspecting driver metadata without loading it; this option serves a different purpose.
B:depmod generates module dependency and alias information for the installed kernel modules; it answers a neighboring question rather than inspecting driver metadata without loading it.
C:modprobe loads drivers and resolves dependent modules; it is not the tool for printing aliases and parameters without loading. insmod directly inserts a single module file without dependency resolution; that changes a different part of the system; the requested outcome is inspecting driver metadata without loading it.
D:lsmod lists currently loaded kernel modules along with size and use-count information; this does not achieve inspecting driver metadata without loading it on the system described.
E:A blacklist tells modprobe not to resolve matching internal aliases into that module during automatic loading; it will not provide inspecting driver metadata without loading it under these conditions.
Question 27
A dracut-managed host has generated an initramfs for a new kernel. Before rebooting, an engineer must inspect whether the image includes the NVMe driver without extracting the image to a directory. Which utility is suitable?
- lsinitrd /boot/initramfs-target.img
- lsmod
- modprobe nvme
- depmod -a
- lspci -nn
Explanation
Correct Answer
A:lsinitrd reads and lists an initramfs image built with dracut, allowing inspection of packed modules and early-boot files without unpacking the archive into a directory.
Incorrect Answers
B:lsmod reports modules loaded into the currently running kernel. A driver in this list may still be absent from the separate initramfs image for the next boot.
C:modprobe attempts to load the NVMe module in the current kernel with dependencies. This does not reveal whether a different kernel image includes that module during early boot.
D:depmod rebuilds the module dependency indexes on disk. It neither lists the contents of a dracut image nor verifies that the driver was included when the image was generated.
E:lspci displays enumerated PCI devices with vendor and device IDs. It can help identify an NVMe controller but cannot inspect a compressed early-userspace image.
Question 28
A recently connected PCI device generates a kernel driver error. Which utility displays kernel ring-buffer messages?
- nvtop
- lsusb
- ipmitool chassis power status
- dmesg
Explanation
Correct Answer
D:dmesg reads messages from the kernel ring buffer, including driver detection and hardware faults. Access may be restricted by kernel security settings.
Incorrect Answers
A:nvtop provides a top-like interactive view of GPU processes and utilization on supported drivers; its scope differs from examining kernel-emitted driver errors, so it cannot meet the stated requirement.
B:lsusb reads USB device information including bus and device identifiers; that is not equivalent to examining kernel-emitted driver errors.
C:ipmitool can query or control supported baseboard management controllers through IPMI; the administrator instead needs examining kernel-emitted driver errors; this option serves a different purpose.
Question 29
A motherboard's firmware version and system serial number are needed for support. Which utility reads SMBIOS data?
- lsusb
- dmidecode
- ipmitool chassis power status
- lspci -nn
Explanation
Correct Answer
B:dmidecode decodes DMI/SMBIOS tables to report firmware, board and system inventory. Such information originates from firmware and may be absent or inaccurate in virtual machines.
Incorrect Answers
A:lsusb reads USB device information including bus and device identifiers; this does not achieve reading firmware-provided machine identity on the system described.
C:ipmitool can query or control supported baseboard management controllers through IPMI; using it would leave reading firmware-provided machine identity unresolved.
D:lspci enumerates PCI devices and the -nn option includes numeric vendor and device IDs; the requirement is reading firmware-provided machine identity, outside the effect of this choice.
Question 30
A custom .ko file is being tested, and all required dependencies are already loaded. Which low-level command inserts exactly that file?
- lsmod
- A modprobe.d blacklist entry
- rmmod driver_name
- insmod ./custom.ko
Explanation
Correct Answer
D:insmod inserts the specified object into the kernel without automatically resolving dependencies. It is lower-level than modprobe and expects a concrete module path.
Incorrect Answers
A:lsmod lists currently loaded kernel modules along with size and use-count information; the evidence calls for directly inserting one kernel object, not merely this separate operation.
B:A blacklist tells modprobe not to resolve matching internal aliases into that module during automatic loading; the task involves directly inserting one kernel object, whereas this addresses another subsystem.
C:rmmod removes a loaded module if references permit it; its scope differs from directly inserting one kernel object, so it cannot meet the stated requirement.