Question 170
A deployment tool should create several nested directories even if parents are absent. Which command is suitable?
- find /srv -type f -mtime -1
- ls -ld /srv/data
- mkdir -p /srv/app/cache
- mv old.csv new.csv
Explanation
Correct Answer
C:mkdir -p creates missing parent directories and does not fail merely because an existing directory is already present. It does not recursively change ownership.
Incorrect Answers
A:find walks a directory tree and evaluates predicates for file type and modification time; the administrator instead needs creating a nested directory tree safely; this option serves a different purpose.
B:ls -ld displays long-format metadata about the directory entry; it answers a neighboring question rather than creating a nested directory tree safely.
D:mv renames or relocates files and can use a filesystem rename when source and target are on the same filesystem; this does not achieve creating a nested directory tree safely on the system described.
Question 171
Two directory entries should point to the same inode of a regular file on one filesystem. Which command creates the second entry?
- Symbolic linkage rather than hard linkage
- readlink symlink
- The inode remains while another hard link exists
- ln original hardcopy
Explanation
Correct Answer
D:A hard link adds another directory entry referencing the same inode and data. It cannot normally cross filesystem boundaries and does not work for arbitrary directories.
Incorrect Answers
A:Symlinks can refer across filesystem boundaries because their contents are paths; using it would leave creating another inode name on the same filesystem unresolved.
B:readlink displays the link target recorded in the symbolic-link inode; the requirement is creating another inode name on the same filesystem, outside the effect of this choice.
C:Unlinking one name reduces the link count, but data remains accessible through surviving names and open references; it does not deliver creating another inode name on the same filesystem, which is decisive in this scenario.
Question 172
A serial console appears in /dev and processes read bytes in a stream. Which node type is expected?
- /dev/zero
- Character device
- locate filename
- lsof +D /mnt/archive
Explanation
Correct Answer
B:A character device exposes byte-stream operations to a driver, as with serial terminals. It is not necessarily seekable like a block-storage device.
Incorrect Answers
A:/dev/zero produces zero bytes on reads for requested lengths; its scope differs from identifying a serial terminal's device class, so it cannot meet the stated requirement.
C:locate searches a filename database quickly rather than traversing the filesystem live; the administrator instead needs identifying a serial terminal's device class; this option serves a different purpose.
D:lsof reports open files held by processes and can search under a directory; it answers a neighboring question rather than identifying a serial terminal's device class.
Question 173
An administrator is comparing /dev/sda and /dev/ttyS0. Which type is normally associated with disks?
- Block device
- lsof +D /mnt/archive
- /dev/null
- locate filename
Explanation
Correct Answer
A:Block devices support addressable block-oriented I/O suited to disk and partition abstractions. Character devices normally present sequential streams instead.
Incorrect Answers
B:lsof reports open files held by processes and can search under a directory; it will not provide identifying the disk-style device class under these conditions.
C:/dev/null accepts and discards writes and returns EOF when read; using it would leave identifying the disk-style device class unresolved.
D:locate searches a filename database quickly rather than traversing the filesystem live; the requirement is identifying the disk-style device class, outside the effect of this choice.
Question 174
A tool must display the pathname stored in a symlink without following it into the target file. Which utility fits?
- Symbolic links store a target path
- readlink symlink
- ln -s /opt/app/config.yml /etc/app-link.yml
- The inode remains while another hard link exists
- Symbolic linkage rather than hard linkage
Explanation
Correct Answer
B:readlink displays the link target recorded in the symbolic-link inode. That value may be relative or point to a nonexistent destination.
Incorrect Answers
A:A symbolic link resolves its stored path during use rather than retaining the original target inode; the evidence calls for reading the stored symbolic-link target, not merely this separate operation.
C:A symbolic link stores a pathname and can cross filesystem boundaries; its scope differs from reading the stored symbolic-link target, so it cannot meet the stated requirement.
D:Unlinking one name reduces the link count, but data remains accessible through surviving names and open references; that is not equivalent to reading the stored symbolic-link target.
E:Symlinks can refer across filesystem boundaries because their contents are paths; the administrator instead needs reading the stored symbolic-link target; this option serves a different purpose.
Question 175
A report file must be renamed within its current filesystem without reprocessing the bytes. Which command does that?
- cp -a source/ destination/
- pwd -P
- touch -m report.txt
- mv old.csv new.csv
Explanation
Correct Answer
D:mv renames or relocates files and can use a filesystem rename when source and target are on the same filesystem. Across filesystems it may require copying and deleting.
Incorrect Answers
A:cp -a performs an archive-style recursive copy while preserving many attributes; it answers a neighboring question rather than renaming a file through the filesystem.
B:pwd -P prints the physical working directory, resolving symbolic components where supported; that changes a different part of the system; the requested outcome is renaming a file through the filesystem.
C:touch can update specified timestamps without modifying file data; this does not achieve renaming a file through the filesystem on the system described.
Question 176
A technician must find regular files under /srv modified within the past 24 hours. Which command expression fits?
- find /srv -type f -mtime -1
- ls -ld /srv/data
- pwd -P
- mv old.csv new.csv
Explanation
Correct Answer
A:find walks a directory tree and evaluates predicates for file type and modification time. The -mtime -1 test covers the most recent 24-hour interval.
Incorrect Answers
B:ls -ld displays long-format metadata about the directory entry; it does not deliver locating recently modified regular files recursively, which is decisive in this scenario.
C:pwd -P prints the physical working directory, resolving symbolic components where supported; the evidence calls for locating recently modified regular files recursively, not merely this separate operation.
D:mv renames or relocates files and can use a filesystem rename when source and target are on the same filesystem; the task involves locating recently modified regular files recursively, whereas this addresses another subsystem.
Question 177
A process's open file descriptors must be listed to discover which file prevents an unmount. Which utility is suitable?
- lsof +D /mnt/archive
- /dev/null
- Block device
- Character device
Explanation
Correct Answer
A:lsof reports open files held by processes and can search under a directory. A recursive scan may be costly on large trees.
Incorrect Answers
B:/dev/null accepts and discards writes and returns EOF when read; the administrator instead needs identifying processes with open files in a mount tree; this option serves a different purpose.
C:Block devices support addressable block-oriented I/O suited to disk and partition abstractions; it answers a neighboring question rather than identifying processes with open files in a mount tree.
D:A character device exposes byte-stream operations to a driver, as with serial terminals; that changes a different part of the system; the requested outcome is identifying processes with open files in a mount tree.
Question 178
A path lookup utility finds files from a periodically generated database but may miss newly created paths. Which tool is it?
- /dev/null
- Character device
- lsof +D /mnt/archive
- locate filename
Explanation
Correct Answer
D:locate searches a filename database quickly rather than traversing the filesystem live. Results depend on when that database was last updated.
Incorrect Answers
A:/dev/null accepts and discards writes and returns EOF when read; it will not provide searching indexed filesystem paths under these conditions.
B:A character device exposes byte-stream operations to a driver, as with serial terminals; using it would leave searching indexed filesystem paths unresolved.
C:lsof reports open files held by processes and can search under a directory; the requirement is searching indexed filesystem paths, outside the effect of this choice.
Question 179
A directory needs a link that can be moved to another filesystem while retaining a valid target path. Which property matters?
- readlink symlink
- ln -s /opt/app/config.yml /etc/app-link.yml
- Symbolic linkage rather than hard linkage
- Symbolic links store a target path
Explanation
Correct Answer
C:Symlinks can refer across filesystem boundaries because their contents are paths. Hard links must refer to an inode on the same filesystem.
Incorrect Answers
A:readlink displays the link target recorded in the symbolic-link inode; the task involves choosing a cross-filesystem path reference, whereas this addresses another subsystem.
B:A symbolic link stores a pathname and can cross filesystem boundaries; its scope differs from choosing a cross-filesystem path reference, so it cannot meet the stated requirement.
D:A symbolic link resolves its stored path during use rather than retaining the original target inode; the administrator instead needs choosing a cross-filesystem path reference; this option serves a different purpose.
Question 180
A file has two hard links and one pathname is deleted. What normally happens to the underlying data?
- Symbolic linkage rather than hard linkage
- The inode remains while another hard link exists
- readlink symlink
- ln -s /opt/app/config.yml /etc/app-link.yml
- ln original hardcopy
Explanation
Correct Answer
B:Unlinking one name reduces the link count, but data remains accessible through surviving names and open references. Removing one hard link does not truncate the other.
Incorrect Answers
A:Symlinks can refer across filesystem boundaries because their contents are paths; that changes a different part of the system; the requested outcome is preserving inode data after one name is removed.
C:readlink displays the link target recorded in the symbolic-link inode; it will not provide preserving inode data after one name is removed under these conditions.
D:A symbolic link stores a pathname and can cross filesystem boundaries; using it would leave preserving inode data after one name is removed unresolved.
E:A hard link adds another directory entry referencing the same inode and data; the requirement is preserving inode data after one name is removed, outside the effect of this choice.