CompTIA XK0-006 (CompTIA Linux+) Practice Test 12

Question 110

Netplan YAML has been reviewed and the new definition must be activated without a confirmation timeout. Which command applies it?

  1. netplan apply
  2. /etc/resolv.conf
  3. netplan try
  4. nmcli connection modify

Explanation

Correct Answer

A:

netplan apply generates and activates backend networking configuration. Care is needed on remote hosts because an incorrect route can sever the session.

Incorrect Answers

B:

resolv.conf exposes resolver configuration, often generated by NetworkManager or systemd-resolved; it answers a neighboring question rather than activating a saved Netplan configuration.

C:

netplan try temporarily applies a candidate configuration and reverts it if not confirmed; that changes a different part of the system; the requested outcome is activating a saved Netplan configuration.

D:

nmcli edits NetworkManager connection profiles, including addresses, gateways and DNS; this does not achieve activating a saved Netplan configuration on the system described.

Question 111

A space-delimited text report needs the third field printed from each record. Which tool handles field-oriented processing?

  1. tr '[:lower:]' '[:upper:]'
  2. awk '{print $3}' report.txt
  3. wc -l export.csv
  4. sort -n values.txt

Explanation

Correct Answer

B:

awk evaluates an action per input record, with $3 referring to the third whitespace-delimited field by default. Its field separator is configurable.

Incorrect Answers

A:

tr translates matching characters in a byte or character stream using supplied sets; using it would leave projecting the third field of each row unresolved.

C:

wc -l counts newline characters in a text stream; it does not deliver projecting the third field of each row, which is decisive in this scenario.

D:

sort -n compares numerical values instead of plain character ordering; the evidence calls for projecting the third field of each row, not merely this separate operation.

Question 112

A text stream should convert lowercase ASCII characters to uppercase without using an editor. Which command performs this?

  1. xargs
  2. uniq
  3. tr '[:lower:]' '[:upper:]'
  4. wc -l export.csv

Explanation

Correct Answer

C:

tr translates matching characters in a byte or character stream using supplied sets. It does not perform context-sensitive multi-line substitutions.

Incorrect Answers

A:

xargs constructs command arguments from input items; its scope differs from translating letter case in a stream, so it cannot meet the stated requirement.

B:

uniq removes consecutively repeated input records rather than converting character encodings or letter case; that is not equivalent to translating letter case in a stream.

D:

wc -l counts newline characters in a text stream; it answers a neighboring question rather than translating letter case in a stream.

Question 113

A list of filenames on stdin should become arguments for a repeated utility invocation. Which tool is designed for that?

  1. tr '[:lower:]' '[:upper:]'
  2. sed 's/old/new/g' config.ini
  3. sort -n values.txt
  4. xargs

Explanation

Correct Answer

D:

xargs constructs command arguments from input items. Null-delimited operation with -0 is safer for arbitrary filenames containing spaces or newlines.

Incorrect Answers

A:

tr translates matching characters in a byte or character stream using supplied sets; this does not achieve converting input records to command arguments on the system described.

B:

sed transforms text as it passes through its editing script; it will not provide converting input records to command arguments under these conditions.

C:

sort -n compares numerical values instead of plain character ordering; using it would leave converting input records to command arguments unresolved.

Question 114

Command output should both appear in the terminal and be saved to a file. Which pipeline element does that?

  1. tee output.log
  2. command 2>error.log
  3. command <<< "$value"
  4. Here-document with <<EOF

Explanation

Correct Answer

A:

tee reads standard input and writes copies to standard output and named files. It can be inserted into a pipeline without discarding live display.

Incorrect Answers

B:

File descriptor 2 represents standard error in the shell; the task involves splitting a pipeline stream to screen and file, whereas this addresses another subsystem.

C:

A Bash here-string supplies a string to standard input, with a terminating newline; its scope differs from splitting a pipeline stream to screen and file, so it cannot meet the stated requirement.

D:

A here-document provides literal or expanded lines as standard input until a delimiter is reached; that is not equivalent to splitting a pipeline stream to screen and file.

Question 115

A file must supply standard input to a command that reads from stdin. Which syntax uses input redirection?

  1. tee output.log
  2. command <<< "$value"
  3. command >> logfile
  4. command 2>error.log
  5. command < input.txt

Explanation

Correct Answer

E:

The less-than operator opens a file as standard input for the process. It does not send the process's output into that file.

Incorrect Answers

A:

tee reads standard input and writes copies to standard output and named files; it answers a neighboring question rather than feeding a process's standard input from disk.

B:

A Bash here-string supplies a string to standard input, with a terminating newline; that changes a different part of the system; the requested outcome is feeding a process's standard input from disk.

C:

Double greater-than redirects standard output in append mode; this does not achieve feeding a process's standard input from disk on the system described.

D:

File descriptor 2 represents standard error in the shell; it will not provide feeding a process's standard input from disk under these conditions.

Question 116

In Vim normal mode, which keystroke saves the current buffer and exits the editor?

  1. tail -n 30 service.log
  2. Ctrl+O in nano
  3. PATH
  4. :wq

Explanation

Correct Answer

D:

The :wq Ex command writes the buffer and quits when successful. It differs from quitting while discarding unsaved changes.

Incorrect Answers

A:

tail selects records from the end of a file and can optionally follow new appends; the requirement is writing changes and exiting Vim, outside the effect of this choice.

B:

Nano's Write Out shortcut prompts for the destination filename and saves the text; it does not deliver writing changes and exiting Vim, which is decisive in this scenario.

C:

PATH is an ordered list of directories searched for external commands without slash-containing paths; the evidence calls for writing changes and exiting Vim, not merely this separate operation.

Question 117

A GUI application started through SSH needs to know where its X display is located. Which environment variable is relevant?

  1. HOME
  2. DISPLAY
  3. source ./env.sh
  4. PATH
  5. PS1
  6. ~/.bashrc

Explanation

Correct Answer

B:

DISPLAY identifies the X server connection for X11 clients. Setting it alone does not provide authorization or X11 forwarding transport.

Incorrect Answers

A:

HOME normally contains the current account's configured home path; that is not equivalent to directing X11 clients to a display.

C:

source executes shell code in the current shell rather than launching an independent process; it answers a neighboring question rather than directing X11 clients to a display.

D:

PATH is an ordered list of directories searched for external commands without slash-containing paths; that changes a different part of the system; the requested outcome is directing X11 clients to a display.

E:

PS1 expands escape sequences into the interactive primary prompt; this does not achieve directing X11 clients to a display on the system described.

F:

Bash normally reads ~/.bashrc for interactive non-login sessions; it will not provide directing X11 clients to a display under these conditions.

Question 118

A sorted input stream contains adjacent duplicate lines and the operator wants one of each. Which utility is appropriate?

  1. tr '[:lower:]' '[:upper:]'
  2. sort -n values.txt
  3. cut -d: -f1 input.txt
  4. uniq

Explanation

Correct Answer

D:

uniq removes consecutively repeated input records rather than converting character encodings or letter case. Sorting first is required when matching lines are separated.

Incorrect Answers

A:

tr translates matching characters in a byte or character stream using supplied sets; it will not provide removing adjacent repeated records under these conditions.

B:

sort -n compares numerical values instead of plain character ordering; using it would leave removing adjacent repeated records unresolved.

C:

cut can extract selected delimiter-separated fields; the requirement is removing adjacent repeated records, outside the effect of this choice.

Question 119

A one-line string must be passed as standard input to a command without echo. Which form uses a here-string?

  1. tee output.log
  2. Here-document with <<EOF
  3. command 2>error.log
  4. command <<< "$value"

Explanation

Correct Answer

D:

A Bash here-string supplies a string to standard input, with a terminating newline. It differs from a here-document's multi-line delimiter structure.

Incorrect Answers

A:

tee reads standard input and writes copies to standard output and named files; the task involves streaming a short variable value into stdin, whereas this addresses another subsystem.

B:

A here-document provides literal or expanded lines as standard input until a delimiter is reached; its scope differs from streaming a short variable value into stdin, so it cannot meet the stated requirement.

C:

File descriptor 2 represents standard error in the shell; that is not equivalent to streaming a short variable value into stdin.

Question 120

An interactive non-login Bash shell must load user aliases automatically. Which startup file is commonly used?

  1. DISPLAY
  2. ~/.bashrc
  3. PS1
  4. source ./env.sh

Explanation

Correct Answer

B:

Bash normally reads ~/.bashrc for interactive non-login sessions. Login-shell startup may involve files such as ~/.bash_profile instead.

Incorrect Answers

A:

DISPLAY identifies the X server connection for X11 clients; that changes a different part of the system; the requested outcome is configuring interactive non-login Bash behavior.

C:

PS1 expands escape sequences into the interactive primary prompt; it will not provide configuring interactive non-login Bash behavior under these conditions.

D:

source executes shell code in the current shell rather than launching an independent process; using it would leave configuring interactive non-login Bash behavior unresolved.

CompTIA Linux+ (XK0-006) Practice Tests